Hi guys.
I'm joining the club.
Yesterday, after 5 days of debugging, I finally made my supercharger work.
Regards
You're currently viewing posts by Pinsider finalquest.
Click here to go back to viewing the entire thread.
Hi guys.
I'm joining the club.
Yesterday, after 5 days of debugging, I finally made my supercharger work.
Regards
Hi guys.
A simple question.
I've seen that when left flipper button is pressed before launching a ball, the game will 'rev the engine'.
I have L1 ROM and I cant do that.
That feature is in a newer ROM?. Or I missing something?.
Regards
Quoted from tiltmonster:You should run a Supercharger test and a time test to see if all of your magnets are working and what tweaks need to be done (optos working). I just bought a new accelerator board, my old one was rebuilt and running really well but I wanted a backup while I could still grab one. Tested and running at 83
Thanks for the welcome guys.
I fixed my SC, I needed to replace all the coils connectors and a power transistor.
Everything is working now, but I cant lower the supercharger test time. I'm getting a constant 180/160. I will try with new balls to see if the problem are magentized balls.
I rechecked all the board, and is working fine. Every magnet firing when the opto crossed.
So I dont know if I can tweek the board to get it better.
I dont really want to buy a new board just for this.
Regars to all
Quoted from tiltmonster:If you enable them one at a time in the SC test you'll get an idea of how they are working, make sure all optos are clean and operational (switch test is the easiest way). I don't recall what my issue was when I sent the accelerator board out for repair but I think opto and slow times were the reason. I have the original board running well and now this new one, both work great.
Magnetized balls can cause an issue, for instance, I was running 109 before I switched out to new balls and it's back to 83-85, with a 160 or 180, I would think there are other issues.
Start with the simple things, ball hitting diverter flap, ball hitting plastic, opto not working, (you mentioned before magnetized balls)....
Optos are working fine, in switch test and SC test.
I will check the diverter and see if the ball is hitting something.
Thanks
You're currently viewing posts by Pinsider finalquest.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/getaway-club-dispatch-run-a-make-on-license-plate-kingpin?tu=finalquest and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.