On My friend's HS2 the ball on the supercharger sometimes goes at a slower speed its that serious?,any ideas what it would be?
You're currently viewing posts by Pinsider Metzu.
Click here to go back to viewing the entire thread.
Quoted from tiltmonster:I'm still unclear what the issue is, and that is one way to test them, but you may want to run your simple tests first in the Test menu, T:12 and T:13, this would indicate your loop speeds (anything lower than 145 is considered ok but I would say 110 and below is ok but that's just my opinion) and it will also show if your optos are working. The board that controls the SC is the PCB accelerator assembly board mounted beneath the PF. I think it would help us to know exactly what the issue is your friend is having so can try to give him the proper fixes.
Quoted from Mr_Tantrum:Remove the SC cover, put system in switch test, then slide a business card or something similar in front of each of the 3 SC opotos by the magnets to see if they close and open properly. It wouldn't hurt to clean all 6 (3 pairs), but I've had to replace all 3 pairs of mine recently.
Even then you will find that different SCs perform faster than others. I've seen some on video and in this forum that are incredibly fast while mine is average. Could be that my magnets have degraded over the years, could be the driver board, who knows. However, they work so I have not messed with them beyond my opto repairs.
Thxs guys i have to check on that the thing its im asking you this beacuse he wants to sell it to me and i want to know if its a serious thing to consider.
hi guys can you tell me whats wrong with this Left flipper flipper?
https://http2.mlstatic.com/flipper-pinball-get-away-D_NQ_NP_634241-MLA28573773634_112018-F.jpg
Quoted from Kobaja:Yes, it is the wrong type. Replace it.
its dificult to replace? i just need the Bat or the hole mechanism?
You're currently viewing posts by Pinsider Metzu.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/getaway-club-dispatch-run-a-make-on-license-plate-kingpin?tu=Metzu and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.