I've had it for like 2 hours and I've seen it 3 times so far
It seems to happen when you get multiball off Burn Rubber
I've had it for like 2 hours and I've seen it 3 times so far
It seems to happen when you get multiball off Burn Rubber
Quoted from Mr_Tantrum:Yeah, that may be the case, but I'm sure you attract all the chicks with that funky vibe black light reactive carpet and such in your swagged out game room. Some guys just have all the luck.
Nope no chicks, those days are long gone for me. Back in the 70's, 80's and 90's look out, me and the Mustang were killers, look at my avatar picture. But because I had such good times I never settled down so no wife or kids.
Quoted from GrimDog:I've had it for like 2 hours and I've seen it 3 times so far
It seems to happen when you get multiball off Burn Rubber
Also, you may want to check all of your settings and put them on default. Then you can experiment from there. BTW, what version do you have?
Quoted from MustangPaul:Nope no chicks, those days are long gone for me. Back in the 70's, 80's and 90's look out, me and the Mustang were killers, look at my avatar picture. But because I had such good times I never settled down so no wife or kids.
Uh oh, you're not going to start posting pics of all your cats now, are you?
Quoted from Mr_Tantrum:Uh oh, you're not going to start posting pics of all your cats now, are you?
Never had time for any animals, I'd be off for weeks at a time when I was doing video.
Quoted from GrimDog:Brought mine home today. Happy for my first pin. Needs some clean up but it will keep me happy till I get my DI
Congrats Grim. Nice!!
Quoted from MustangPaul:Never had time for any animals, I'd be off for weeks at a time when I was doing video.
I didn't know you did Video. I'm in AV myself.
Quoted from GrimDog:I've had it for like 2 hours and I've seen it 3 times so far
It seems to happen when you get multiball off Burn Rubber
Welcome GrimDog!
I have had HS2 for a bit over a week, but also hit the multi-ball bug like crazy. Annoyed me enough I have ordered an L-5 ROM (which has a different bug some consider a bigger problem). While I wait to try L-5, playing in Tournament Mode I haven't hit the issue. The Burn Rubber awards are deterministic in this mode and Multiball is the 5th awarded. (less multiball, less fun?)
ROM Comparison - https://pinside.com/pinball/forum/topic/getaway-club-dispatch-run-a-make-on-license-plate-kingpin#post-1407040
There is some mention of both bugs in this thread, but this is maybe the best description of the L-5 bug -
https://pinside.com/pinball/forum/topic/hs2-getaway-is-in-the-house-multiball-bug#post-242434
Quoted from Charger500:I didn't know you did Video. I'm in AV myself.
Cool, I had my own small video production company for 20 years. Boy do I have video equipment I could sell.
WOS box art showing 2 dvds (resized).jpg
WOS box art (resized).jpg
IMGA0837 (resized).JPG
IMGA0055 (resized).JPG
IMGA0051 (resized).JPG
Quoted from Mr_Tantrum:Yeah, the Onlyest can be so emasculating sometimes. Probably intentional, but I continue to give him the benefit of the doubt.
Huh? I think he meant Doh, that you didnt see that on ebay yourself.
Quoted from Mr_Tantrum:Wait a minute! Are you pulling one over on me? Did you just post this for sale after you've been reading my posts? I see what you did there. Also, smart thinking shipping from your Jersey estate so as not to be as easily identified.
If that was mine, ida just sent it to you a week ago.
Quoted from MustangPaul:Cool, I had my own small video production company for 20 years. Boy do I have video equipment I could sell.
Hmm... sorry but I cannot get past the thought of some cheesy, "fuzzy" 80's porn videos, gah
Quoted from TheOnlyest:If that was mine, ida just sent it to you a week ago.
Maybe Mr T would prefer to make his own anyway! and besides, it gave me something to do, certainly wasn't a big deal.
Quoted from SUPERBEE:Welcome to the club chris!
thanks for the nice welcome guys i will upload pics when i am back
From the ROM revision post:
ROM REVISION ........................................... L1 L2 L5
Multiple balls released from lock multi player) ...? N Y
Is this really a common issue? Or could it be thought to be due to circumstances on a specific game.
I assume this is addressed as a problem in 1-in-1-out lock trough behaviour.
Quoted from tiltmonster:Hmm... sorry but I cannot get past the thought of some cheesy, "fuzzy" 80's porn videos, gah
I did get asked to make a few of those but I turned them down, I didn't want my company to be known as "that kind" of video company.
Quoted from Mancave:I was just about to put on some of that 70's "style" music to set the mood too
Actually it was 80's style music.
Quoted from MustangPaul:I did get asked to make a few of those but I turned them down, I didn't want my company to be known as "that kind" of video company.
Ha ha! Turn back the clock and who knows what your collection would look like!
Quoted from TheOnlyest:Huh? I think he meant Doh, that you didnt see that on ebay yourself.
If that was mine, ida just sent it to you a week ago.
Sometimes I forget how my feeble attempts at humor with you typical fail (don't worry, I realize I'm not that funny). Anyway, just meant that you pointed out an obvious solution that I somehow overlooked as eBay is usually my first source for everything. As always, thanks for the advice.
Quoted from Mr_Tantrum:Sometimes I forget how my feeble attempts at humor with you typical fail (don't worry, I realize I'm not that funny).
My Rom identifies as P-C and while not particularly well documented I can tell you I DO NOT have the Free Ride bug, I DO have "Run the Red Light Mode" near as I can tell its basically L5 with Red Light mode patched back in. IIR L2 scores pretty high on Video mode. My P-C Rom seems to score about the same as L5 which is lower than L2. I have a virtual pin as well so I have tried all HS2 roms at some point but its been awhile so I may not remember all the differences though it seems to me like P-C is the way to go.
So we rebuilt all three flippers on the re-import Getaway and I'm noticing that all of the coils (except the flippers) on the game are AE-26-1700, except one AE-26-1500. Referencing the manual these are totally wrong, and I suspect the operator just swapped them out for whatever was on hand (why, I don't know). Should I bite the bullet, spend ~$125 and replace all coils per the manual?
Quoted from enkiktd:So we rebuilt all three flippers on the re-import Getaway and I'm noticing that all of the coils (except the flippers) on the game are AE-26-1700, except one AE-26-1500. Referencing the manual these are totally wrong, and I suspect the operator just swapped them out for whatever was on hand (why, I don't know). Should I bite the bullet, spend ~$125 and replace all coils per the manual?
Was that a typo the 26-1700? Most of the coils should be 26-1200. Can't see why someone would change all of them out, that would be some really bad failure.
Quoted from Charger500:Another Tantrum's Tacky. Love it! Thanks, T!
Where? I don't see it.
Quoted from enkiktd:So we rebuilt all three flippers on the re-import Getaway and I'm noticing that all of the coils (except the flippers) on the game are AE-26-1700, except one AE-26-1500. Referencing the manual these are totally wrong, and I suspect the operator just swapped them out for whatever was on hand (why, I don't know). Should I bite the bullet, spend ~$125 and replace all coils per the manual?
Yes, for sure
Quoted from twenty6point2:Welcome GrimDog!
I have had HS2 for a bit over a week, but also hit the multi-ball bug like crazy. Annoyed me enough I have ordered an L-5 ROM (which has a different bug some consider a bigger problem). While I wait to try L-5, playing in Tournament Mode I haven't hit the issue. The Burn Rubber awards are deterministic in this mode and Multiball is the 5th awarded. (less multiball, less fun?)
L-5 Rom - https://pinside.com/pinball/market/shops/1083-matt-s-basement-arcade/00902-high-speed-ii-the-getaway-cpu-rom-u6
ROM Comparison - https://pinside.com/pinball/forum/topic/getaway-club-dispatch-run-a-make-on-license-plate-kingpin#post-1407040
There is some mention of both bugs in this thread, but this is maybe the best description of the L-5 bug -
https://pinside.com/pinball/forum/topic/hs2-getaway-is-in-the-house-multiball-bug#post-242434
I set mine to tournament mode too to eliminate the issue from popping up. Only turn off tourney when the kids are playing now. I didn't like the randomness of it anyway.
Random noob question. I have a nice build up of black funk on the supercharger ramp. What do I use to safely clean that off?
Quoted from GrimDog:Random noob question. I have a nice build up of black funk on the supercharger ramp. What do I use to safely clean that off?
Can you take a photo of what you are taking about? Would help to decide on what procedure to go with to clean.
Quoted from GrimDog:Random noob question. I have a nice build up of black funk on the supercharger ramp. What do I use to safely clean that off?
Metal polish, I like never dull myself, but there are plenty of choices.
Quoted from GrimDog:I think I need new balls too. What do you guys recommend?
Shiny from PBL, and Titan has very nice ones too.
Quoted from Mr_Tantrum:Shiny from PBL, and Titan has very nice ones too.
PBL doesn't have Shiny anymore.
I got some cleaning and waxing to do. Table feels slow compared to videos I seen. Half the shots in the supercharger ramp make it around once then don't have enough force to hit the magnet then just come back out.
Quoted from MustangPaul:WOW!!! I've never seen ball trails that bad on metal ramps before.
I agree !!!
Quoted from GrimDog:I think I need new balls too. What do you guys recommend?
Dont waste your money on anything but decent pinballs.
Quoted from SUPERBEE:Dont waste your money on anything but decent pinballs.
Yea, that's why I was asking for recommendations. I have no clue.
Quoted from GrimDog:I got some cleaning and waxing to do. Table feels slow compared to videos I seen. Half the shots in the supercharger ramp make it around once then don't have enough force to hit the magnet then just come back out.
I think, based on how grimy your supercharger ramp is, you need to do a full teardown and cleaning of the playfield. You will not believe the difference in how it will play !!! Clean that baby up !!!!! Use a good metal polish on that ramp and if you want to regrain, lots of good advice on this site to do just that.
Quoted from GrimDog:Half the shots in the supercharger ramp make it around once then don't have enough force to hit the magnet then just come back out.
That doesn't sound good, I wonder if all 3 of your magnets are working.
Quoted from GrimDog:Yea, that's why I was asking for recommendations. I have no clue.
Just dont bother with the "ultra cool" "ultra shiny" balls. Get the ordinary pinballs for the best price and just change them once every year or so or when they start to look a little rough. I dont care what anyone says, anything more than that is money wasted.
Quoted from SUPERBEE:Just dont bother with the "ultra cool" "ultra shiny" balls. Get the ordinary pinballs for the best price and just change them once every year or so or when they start to look a little rough. I dont care what anyone says, anything more than that is money wasted.
No that's just because your cheap.
Quoted from MustangPaul:That doesn't sound good, I wonder if all 3 of your magnets are working.
I agree Grim. Go into test mode and see what your supercharger speed is working at and post back. Could be just time to clean the optos with a qtip and windex.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/getaway-club-dispatch-run-a-make-on-license-plate-kingpin/page/132?hl=charger500 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.