Hi,
In my Getaway all lamps in the backbox stopped working, I checked the fuses are ok, I replaced the connector with a new one and it still does not work.
What else to check?
You're currently viewing posts by Pinsider fly.
Click here to go back to viewing the entire thread.
Hi,
In my Getaway all lamps in the backbox stopped working, I checked the fuses are ok, I replaced the connector with a new one and it still does not work.
What else to check?
Quoted from Lhyrgoif:Did you check the fuses visually only, or did you actually remove them from the fuse holder and measured them for continuity with a multimeter? Fuses can look ok visually but still be broken. Only way to be sure is to remove and measure.
I checked with a multimeter
Quoted from LTG:AC power to driver board GI, AC power leaving driver board to backbox. Try and narrow down which direction to go.
Bulbs good ?
LTG : )
Ok
Bulbs ok
You're currently viewing posts by Pinsider fly.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/getaway-backbox-dead-wire?tu=fly and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.