make sure the ethernet cables actually click in. also, check to see if yours has had the service bulletin update installed.
https://sternpinball.com/wp-content/uploads/2018/10/Stern-SB189.pdf
You're currently viewing posts by Pinsider titanpenguin.
Click here to go back to viewing the entire thread.
make sure the ethernet cables actually click in. also, check to see if yours has had the service bulletin update installed.
https://sternpinball.com/wp-content/uploads/2018/10/Stern-SB189.pdf
also, another node board update:
https://sternpinball.com/wp-content/uploads/2018/10/Stern-SB190revB.pdf
Quoted from timmmmyboy:Yeah, all the cables click in for sure. Service bulletin has not been installed, but I feel like if it was any hardware issue on the board swapping 8 and 9 and changing dip switch should have shown 8 out, no? Maybe a particular mod is drawing too much power? I think I read someone else had an issue randomly with a particular LED not playing nice and causing a node to fail. volunteerpin Do you remember what if any mods tap into boards on the underside of the PF?
The fix is for both boards 8&9, so I wouldn’t rule it out.
You're currently viewing posts by Pinsider titanpenguin.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/gble-node-board-9-issue?tu=titanpenguin and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.