You're currently viewing posts by Pinsider leigh.
Click here to go back to viewing the entire thread.
We had a dedicated sub board put in.
63 amp main breaker and individual 16 amp breakers.
Approx 10 double outlets, placed around the room.
The only pin that occassionally trips a breaker is STTNG, it draws about 4.8 amps during normal play.
The main breaker is 3 phase, then the load was shed over the 16 amp single phase breakers.
IMG_0264.jpg
This of course was overkill, still not sure if we are going to extend the room, it was installed on the thinking that we would.
I have not measured the current draw at full load, but with all pins on, beer fridge, lights and A/C all on, based on pins drawing 3 amps, i would estimate approx 36 amps.
This does not happen often though.
You're currently viewing posts by Pinsider leigh.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/gameroom-electrical-questions?tu=leigh and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Bayswater