Creature from the Black Lagoon
Bally, 1992I picked up a creech that doesn't boot when you turn it on.
how ever the seller told me if you leave it for 10mins it will boot.
I poked around and found the following.
If i discount the connector J902 on the fliptronics the game boots,then i can reconnect this and game plays perfectly.
Any ideas where to start?
i suppose stick in another fliptronics board and see if the problems stays would be a start.
Agreed test you PS 1st. Could be bad +12v line. So check power supply on test points then work your way through machine testing powers everywhere. Could be wires need reseated or bad solder joint on pin connecters.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/game-wont-boot-cftbl and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Berlin
Waterford, PA