I've got a game plan sharpshooter 2 power supply on the bench. All of my voltages are solid, except for the 24v line. The fuse for 24v was blown when I picked up the game. I replaced the fuse and it hasn't blown again. The bridge rectifier seems to test fine, and I've reflowed every joint. Still nothing for 24v. I'm at a loss for where to keep looking, the manual/writeup on pinrepair ends at the bridge. Afraid I'm looking at a bad transformer at this point. I would appreciate any help in tracing this down!

Yes, just tested the transformer, I am getting proper voltage from it.

It seems as though I had tested the bridge wrong at first
I am getting 33.6vac at the ac points, but nothing out of the DC points. I've got a replacement ordered, hopefully that will be all it needs. Thanks!