Just finished my cyclopes and dialed it in.
What an awesome game!
Lots of fiddling with drops:
Gottlieb drops work as long as you shave a bit of plastic off the back to make it flat. Then, I had to add some washers to the screws on the back of the mech to allow free movement of the lever arms.
Then the stand-up targets need to be adjusted so they’re far enough back so to allow the drops free movement when hit.
Had to also adjust the lane guide behind the mini flipper back a bit. Otherwise the bat stuck out too much and made the lock shot too tight.
Also added resistors to the lamp board (like I do with bally/stern games) to remove led flicker.
And I found out, early Stern plungers/links and coil stops work great.
466E58F1-6E86-4570-A47C-B93E7EDA2AB1 (resized).jpeg