You're currently viewing posts by Pinsider Lambecka.
Click here to go back to viewing the entire thread.
After repair/restauration of my big deal everything works fine exept the following
At the end of a game the machine stops and a new game can be started, but if the games is at the end the lights for game over does,not light up and also the light form game match do not lite.
Already checked switch E from game over rel , but they are ok. Also the bulbs are new.
Any suggestions???
Quoted from HowardR:You didn't say how you checked. Use an Alligator clip jumper wire from the Brown wire on the 6 volt fuse to the Grey&Orange wire on the Game Over light. Then work back from there.
Howard,
Thanks i started the wrong site. Jumpered from the the fuse learned that contact of one of the connection plugs from backbox not making contact. Also found that the match unit not powers at the end of the game, so match number stays the same al the time, another challenge for me
Albert
Quoted from HowardR:There's a switch on the 100 Point relay that should move the Number Match Stepup solenoid.
Howard, yes you,r right it was that switch, difficult to, see but that particular switch did not make contact.
Problem solved
Thanks again,
You're currently viewing posts by Pinsider Lambecka.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/game-over-williams-big-deal?tu=Lambecka and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Veendam
Baldwinsville, NY