Bally Rock Makers 1968
Thanks to the guys at EM Pinball Online Repair Clinic Friday, I’ve been able to work through several problems. Have one last issue at start-up? The Game Over Latch relay is not fulling latching in. All of the Game Over switches are clean and gapped correctly. If I put a little pressure on the latching plate it will make full contact with the latch coil and a game can be played. If I release the light pressure off the plate the game will not play. I checked the coil for voltage and resistance both were good. I removed the coil and replaced with another working coil same problem, plate does not hold to coil. I jumped everything from the yellow wire at the transformer to the Game Over Latch Relay coil. Everything closes the latch plate, but does not hold it tight against the coil. I am stumped! Any, suggestion will be helpful.
Thanks
Kickout