(Topic ID: 30993)

Fuses for EM machines

By Skybug

11 years ago



Topic Stats

  • 6 posts
  • 3 Pinsiders participating
  • Latest reply 11 years ago by Skybug
  • No one calls this topic a favorite

You

Linked Games

#1 11 years ago

Hi, my schematics say (I think):
- 10 amp/50 V
- 8 amp/6 V
- 10 amp/6 V

Does this mean I have slow-blow or fast-blow fuses? Some need to be replaced and I'm having trouble finding an exact match. I have a Bally Joust EM.

Thank you!

#2 11 years ago

Unless the specify slow blow / time delay they are normal fuses.

These values are very common, you can probably find them at hardware store like lowes or home depot. Radio shack probably has them too.

#3 11 years ago

I should mention you can go over on voltage, but not amps.

#4 11 years ago

OK thank you!

#5 11 years ago

Does this mean I have slow-blow or fast-blow fuses? Some need to be replaced and I'm having trouble finding an exact match. I have a Bally Joust EM.

Try here>> http://www.pbresource.com/fuses.html
The OEM Bally fuse holders are usually crap i would order these to >>FUS-HLDR-SNAP
$1.10ea
From PBR too. Or Radio shack has the same stuff

#6 11 years ago

Thanks, Pin-it!

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/fuses-for-em-machines and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.