(Topic ID: 257821)

Fuse blows after ball is popped into shooter lane. System80B.

By Yeastlord

2 years ago



Topic Stats

  • 5 posts
  • 3 Pinsiders participating
  • Latest reply 1 year ago by Yeastlord
  • No one calls this topic a favorite

You

Linked Games

No games have been linked to this topic.

    #1 2 years ago

    I got a Gold Wings that was not working and have been hammering away at multiple levels of issues. Solved a bunch of problems with the ground mod and the daughter card replacement. Now the game will play perfectly with the first ball but after that the second ball will not get pushed into the lane and fuse 11 is blown again. The solenoid tests OK. I'm at a loss as to where to look next. Thanks for any help and happy holidays!

    #2 2 years ago

    Did you go through all of the recommended fixes on pinwiki?

    #3 2 years ago

    I'm not sure if I got them all. I did both the interconnect cable and Todd Tuckey ground mods. I also swapped out the daughter card for a Pinitech replacement. The voltages looks good. I found that the outhole never fires so maybe that solenoid is toast. It has proper resistance but maybe something else is wrong.

    Thanks again for the help.

    3 months later
    #5 1 year ago

    More data: I swapped out the coil with a known good one. (so I'm sure the diode is good) Same issue. As soon as it pops the ball into the lane the fuse blows. No other sensors or anything else seems to be engaged.
    Also the outhole now works fine - broken wire.

    Any ideas would be great!

    Hey there! Got a moment?

    Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside