I picked up a DE Jurassic Park with an XP-DEPPB Rev A board installed, and today it blew Fuse 7. When I looked in the original DE manual for what fuse value to install, it looks like the original PPB board only had six fuses. I couldn't find any info on the XPin website about fuses for this board other than I need to install the originally recommended fuse values.

Does anybody know what the purpose of fuses 7 through 9 are on this board and what value fuses should be used? Is there an actual manual somewhere for the XP-DEPPB board?

Thanks!

Never mind. They were listed in the schematic of the board. Just not at the front of the manual.

Unfortunately, I don't think I ever found the x pin schematic. I was able to find the corresponding fuses in the original Data East JP manual, and just assumed they had a 1 to 1 correspondence. So far that has worked out. I also replaced several other parts (broken coils, diodes, and a bunch of bad wiring jobs), so those may have been what was blowing my fuse to begin with.

Good luck!