Fun Land
Gottlieb, 1968Hey everyone, I recently picked up a cheap Funland project for something new to work on but I have been stumped right from the get go. So when I hit the start relay, both reset banks kick as they should, but that is all I get. Nothing else. The playfield will not activate, the kickout does not register, nothing at all. I don't have the schematics either which makes this all that much more difficult. Where should I be looking first? Thanks!
Quoted from dpapclare:I don't have the schematics either which makes this all that much more difficult. Where should I be looking first?
pbresouce has the Fun Land schematic here: http://pbresource.com/pfplayfEM.htm
Quoted from dpapclare:when I hit the start relay
Hit it with a bigger hammer? (Couldn't resist)
Quoted from dpapclare:So when I hit the start relay, both reset banks kick as they should, but that is all I get. Nothing else. The playfield will not activate,
Inspect and diagnose this circuit with Alligator clip jumper wires
https://pinside.com/pinball/forum/topic/gottlieb-big-shot-repair#post-6305153
http://www.planetimming.com/Pinball/troubleshooting/EM%20Troubleshooting.pdf
http://www.pinrepair.com/em/index3.htm#features
Example of a pinsider actually doing this https://pinside.com/pinball/forum/topic/red-baron-tech-question#post-5858156
pasted_image (resized).pngWanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/funland-issues and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Fredericton, NB
Boulder, CO