Hello all. Looking to join the club but it's going to come with a lot of work. I'm trying to build one but one thing I want is a populated playfield. If anybody in the group has one or knows someone that has one they may want to get rid of please let me know. Looking for a populated playfield mainly for the parts and harness. Not expecting it to be 100 percent. I wanna be in the club bad.

Reaching to the funhouse club to see if anyone can help me. I am in the process of locating parts for a funhouse build I am trying to do. One thing that is hard to find is the ball guides throughout the playfield. I have reached out to Marcos to see if they have these for a future release. Marcos is looking for a set to be able to reproduce from if anyone has these. They would love to have the actual set but could possibly reproduce from pictures and measurements.
I'm about 30 miles from Marcos and could hand deliver and would make sure you get them returned to you if you are willing to send a set for them to use. Figured I would reach out here before posting a new thread. Please let me know

Looks like Rudy plastic has been found. Still looking for other parts

Does anyone have a set of Reese rails they would like to part with for Funhouse? Fixing to start a scratch build and need a set of rails.

Can anyone get the measurements for the playfield back board. Starting my build and need to make this part. Thanks

I'm looking for a few ball guides for a funhouse. Hopefully someone here has some extra. Please let me know if possibly have these you would be willing to part with. Thanks

Looking for:
A-14080
A-14068
A-14062

5cf13ec958f517fd433036c84b635b74073d18ce (1)_1 (resized).jpg

73c367db767930fb3ada3659737356bfe6bd9b81 (2)_1 (resized).jpg

a9e50bbe5c5547ed89ef89e5df22f8225bf58dda_1 (resized).jpg

Can someone let me know what the thickness of the playfield back board is. Looking to make mine for my funhouse project. Thanks

Thanks for checking

Thanks

Is it possible to get the height of the back board. The width should be the same measurement as the playfield. I'm having some made and want to make sure it's correct before I get them. Thanks

Thankyou. This should help to make sure what I have coming is correct.

Does anyone body have a trap door they want to sell? Still collecting parts for a build I'm working on

Does anyone have any teardown photos that they would be willing to share. Starting build and looking for post placement and part layout. Could use photos of top and bottom of playfield. Thanks

That will give me a start. Thanks

Thanks pencilneck. These are exactly what I'm looking for. Thanks

I'm also in the process of locating hard to find parts and building a funhouse. I have my Rudy apart doing some work getting it ready for install. I should be able to get the measurement you need sometime this evening. Boblangelius is top notch and can get everything you need in SOLIDWORKS. He's great to work with. If you don't want to go his route let me know. I'll see what I can do

I could use a translite also if there's one left over after aamauzy gets what he needs. Pm me if interested. Thanks

Working on a funhouse build and trying to figure out what the length of the 3 hex spacers are for the ramps. I need measurements on the two for the main ramp and the one for the step ramp that are attached to the side rails. I ordered the spacers from the manual but not sure if the manual is correct. Any help would be appreciated.
I am also looking for a couple of the part that I have pictured below. Pinball life has the 6/32 but I need the 8/32 version. I am not finding them anywhere. Thanks

IMG_20240127_211235062_HDR (resized).jpg

I called Marco and they said they didn't have any. Thanks for the link

I was able to put the quantity needed iny cart also. Not sure what was going on.

Let me know if you have any and want to get rid of them. I need 3 to get the ramps mounted. I'll hold off ordering until I hear from you. Thanks