Hey everyone! I'm shopping out a FH for a friend. Rudy is very noisy, and his eyes don't close. Is there a rebuild kit I need or does he just need taken apart and cleaned?
Thanks!
You're currently viewing posts by Pinsider chuckwurt.
Click here to go back to viewing the entire thread.
Quoted from Lermods:Pinbits has a rebuild kit. His eyes don't close because the centering flange is probably toast.
Okay thanks so much. Now he's also really noisy when he moves his mouth and when his eyes move left. More indication of a rebuild needed or something else?
Quoted from Lermods:Not sure, but it could be his gears are gummed up. When you take him out, give everything a good cleaning and lube the gear. There's not much to him in terms of noise, two coils and the gear motor.
Thanks. Also I don't see the rebuild kit on pin bits. Just a eyeball protector set.
Quoted from Lermods:That's the kit...
http://www.pinbits.com/index.php?main_page=product_info&cPath=13_3&products_id=401
You won't need the eyelid protectors, but will likely need the round black centering flange and possibly the long plastic pieces that connect between the coil plunger and the eyelids. If I were you, I'd take him out and see what's going on. The manual has a very good diagram too. Then order that kit. You will need a small punch to get the roll pins out, kit comes with new ones.
Sounds good. Thanks again. Just making sure I'm looking at the right stuff.
Rebuilt the flippers on this funhouse and it's seems the flippers are crazy strong. Are there strength settings on this game? Weaker coils I can use?
Quoted from waterdraak:You could try to check your EOS switches if they are always closed when not used,
and that they open faster should make them a little less strong.
I noticed that on my funhouse.
Great call. I'll try this first.
You're currently viewing posts by Pinsider chuckwurt.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/funhouse-club?tu=chuckwurt and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.