I bought a $500 funhouse a while back and finally had the chance to pick it up from my buddy. I got it home and set it up. Oh man. I don’t think it’s too horrible but I also don’t think it’s going to be easy. It’s really dirty and disassembled. Hopefully I can get it playing first before I decide what to do with it.

EA85890C-F23C-4EBB-9032-3C537F48F58E (resized).jpeg

6E142A94-DD0F-4EC6-9124-EDA66B9E09A1 (resized).jpeg

8AD9F422-455C-4636-A2B3-48BAAFD0EC0D (resized).jpeg

I think the main thing with this, is Rudy is taken apart already and looks to be missing a Bunch of stuff and the eyeballs are broken. ill probably start there and then start on the game. I think cleaning will go a long way

Got funhouse to boot. I have a ground short row one white/brown and red grey lights are locked on. Have a new rottendog board in it.

Ok here is what I found out last night. The current issues I have found are:

1: the flippers always have constant power
2: fuse f103 blows even if all the Rudy stuff is disconnected
3: the ball lock release solenoid is locked and removed, no longer blowing the secondary
4: red/grey lamp matrix is locked on
5: the red wire flasher lamp circuit is locked on.
6: the start button is broke
7: the test switches needs replaced

Found I have a bad cpu!! If I can have mine repaired I’ll orobabky just order a rotten dog

Looking for a few plastics if anyone has spares laying around. The plastic over the hotdog bank, the one over the s target, the right side of the Rudy entrance, right sling, and the one over the scoop by the pop bumpers.

Well we got funhouse together and playing!! The only issue we had was the left pop bumper coil burnt and the transistor literally blew on for that pop bumper. I need to look and see what caused that. Other than that it’s good!

5CA9D0A0-FEA7-4971-8A60-82AB945A071C (resized).jpeg

7EB30D72-325E-48C1-8A3A-95B22A5CDAAA (resized).jpeg

Misaligned Rudy jaw optos are going to drive me crazy

I have something really strange going on with may funhouse. when I got it it was trashed, replaced the mph and driver board with rottendogs and it cleared up all the issues it had and has played flawlessly up until the other day. I have the game out on location and go to check on it and all the feature lights are out and all the solenoid fuses are blown. I looked at everything that I could and nothing felt hot or burnt. I replaced the fuses and everything played ok. So I took the game home and started checking stuff out and found that every single controlled light was melted or started to melt and 2 of the white flashers basically blew up. Also ruddy jaw isn't working any more and the Rudy opts and the staircase opts isn't working either. I took the boards out and looked to see if there are any burns or melted areas on it and everything looks fine. I have no clue where to start on this.

I may have a spare. I’ll look tonight

I had funhouse on location till it blew up. $.50 with a DBA