A few days ago CT told me they should be receiving a shipment of games in 10-14 days. My game is in that shipment so hopefully the estimate was accurate.

If your shots are hitting the sign maybe check to make sure your spinning wheels are perfectly level with the playfield, as you may be getting some air balls off the wheels.

When my game was first delivered I was getting a lot of rejections from my right ramp. I finally figured out that the ramp was tightened down so much from the factory it caused a slight lip between where the ramp's flap and the ramp plastic meets. Loosening the nut and screw that holds the ramp down allowed the ramp to be raised up slightly so the transition from the playfield to the ramp is much smoother. Significantly more successful shots up the right ramp and far less frustrating.

Inductive switches can be adjusted by placing a small screwdriver between the PCB and the playfield and pushing the switch out towards the playfield so it is sticking out at its maximum. See attached pic, hope this helps.

switch_adjust_(resized).JPG