(Topic ID: 100377)

FS/FT: Williams Pinbot & Williams Comet (NorCal)

By pinballholder

9 years ago


Topic Heartbeat

Topic Stats

You

Linked Games

Topic Gallery

View topic image gallery

WP_20140816_09_56_02_Pro.jpg
WP_20140816_09_55_56_Pro.jpg
WP_20140816_09_55_18_Pro.jpg
WP_20140816_09_53_30_Pro.jpg
WP_20140816_09_53_24_Pro.jpg
WP_20140816_09_53_10_Pro.jpg
WP_20140816_09_53_00_Pro.jpg
WP_20140816_09_52_53_Pro.jpg
WP_20140816_09_52_38_Pro.jpg
WP_20140816_09_52_33_Pro.jpg
WP_20140816_09_52_47_Pro.jpg
WP_20140816_09_52_26_Pro.jpg
WP_20140816_09_52_06_Pro.jpg
WP_20140816_09_52_13_Pro.jpg
WP_20140816_09_52_20_Pro.jpg
WP_20140816_09_51_59_Pro.jpg
#1 9 years ago

I have two pinballs that I am looking to trade for one pinball. My preference would be Taxi, Cyclone, Diner, or Whirlwind, but I am open to any System 11 / WPC title. I would also entertain a cash offer for both but not sure what price to set. I will attempt to post enough pictures and provide enough information to let you decide. Please feel free to offer advice in terms of value, as I have no clue (other then what I have invested into them).

Pinbot ($1,100)
-----------------------------------------------------------------------------------------------------
The Good:
-100% playable, no switch issues & no glitches
-Plastics are 99% including unbroken upper left sling plastic and the top of the vortex
-Freshly installed plastic protectors
-XPin displays just installed
-LED's in backbox and a few LED's scattered in top right of playfield
-Light grid looks great, no overlays that I can see, and little to no mylar bubbling or insert lifting (not an expert)
-On board battery holder was removed and replaced with off board one
-Shooter rod/spring/clip brand new
-New flipper buttons
- New super bands installed

The Bad:
-Light topper was shattered and glued back together, pieces missing
-There is no glass with the translight, just the plastic sheet (I don't notice it when installed)
-Some playfield wear under mylar (this may be good as it implies mylar was not from factory, see photos)
-Planking and crazing throughout playfield, but not enough to impact game play (see photos)
-While cabinet side or "OK", the front and parts of the backbox are pretty beat up

Comet ($750)
-----------------------------------------------------------------------------------------------------
The Good:
-Compared to other Comet playfields I've seen, this one looks pretty good (only two major wear spots, easy touch up)
-Displays are working like a champ
-Plastics appear to be whole, with the exception being the Hit the Dummy plastic that sits under center ramp
-Center ramp is unbroken but has some cracking near the bottom right entrance, good enough to keep IMHO
-Flipper's just rebuilt, including coils and bats, installed super bands
-Very playable, but does have two switches complaining during diagnostics
-Backglass looks decent, only some wear top right (when viewing backside)

The Bad:
-The cabinet needs to be completely sanded and repainted (but seem structurally sound)
-Backbox has damage (see particle board backing is cracked near air vents)
-Front face of cabinet is starting to delaminate
-Planking and crazing, but nothing that affects game play (see photos)
-Cracked/broken corkscrew that was tapped together (sigh)
-Cycle jump is broken in the normal places
-Needs new decals for shooting galleries, dummy, and shoot a million
-Sound is overheating after 10 mins and cutting out
-Really horrible legs
-Inside of cabinet still needs a good cleaning

#2 9 years ago

PinBot Pictures
WP_20140816_10_02_57_Pro.jpgWP_20140816_10_02_57_Pro.jpgWP_20140816_10_02_47_Pro.jpgWP_20140816_10_02_47_Pro.jpgWP_20140816_10_02_07_Pro.jpgWP_20140816_10_02_07_Pro.jpgWP_20140816_10_01_44_Pro.jpgWP_20140816_10_01_44_Pro.jpgWP_20140816_10_01_11_Pro.jpgWP_20140816_10_01_11_Pro.jpgWP_20140816_10_01_04_Pro.jpgWP_20140816_10_01_04_Pro.jpgWP_20140816_10_00_51_Pro.jpgWP_20140816_10_00_51_Pro.jpgWP_20140816_10_00_43_Pro.jpgWP_20140816_10_00_43_Pro.jpgWP_20140816_10_00_37_Pro.jpgWP_20140816_10_00_37_Pro.jpgWP_20140816_10_00_30_Pro.jpgWP_20140816_10_00_30_Pro.jpgWP_20140816_10_00_19_Pro.jpgWP_20140816_10_00_19_Pro.jpgWP_20140816_10_00_13_Pro.jpgWP_20140816_10_00_13_Pro.jpgWP_20140816_09_59_59_Pro.jpgWP_20140816_09_59_59_Pro.jpgWP_20140816_09_59_48_Pro.jpgWP_20140816_09_59_48_Pro.jpgWP_20140816_09_59_40_Pro.jpgWP_20140816_09_59_40_Pro.jpgWP_20140816_09_59_33_Pro.jpgWP_20140816_09_59_33_Pro.jpgWP_20140816_09_58_56_Pro.jpgWP_20140816_09_58_56_Pro.jpgWP_20140816_09_58_35_Pro.jpgWP_20140816_09_58_35_Pro.jpgWP_20140816_09_58_31_Pro.jpgWP_20140816_09_58_31_Pro.jpgWP_20140816_09_58_16_Pro.jpgWP_20140816_09_58_16_Pro.jpg

#3 9 years ago

Comet Pictures:
WP_20140816_09_56_02_Pro.jpgWP_20140816_09_56_02_Pro.jpgWP_20140816_09_55_56_Pro.jpgWP_20140816_09_55_56_Pro.jpgWP_20140816_09_55_18_Pro.jpgWP_20140816_09_55_18_Pro.jpgWP_20140816_09_53_30_Pro.jpgWP_20140816_09_53_30_Pro.jpgWP_20140816_09_53_24_Pro.jpgWP_20140816_09_53_24_Pro.jpgWP_20140816_09_53_10_Pro.jpgWP_20140816_09_53_10_Pro.jpgWP_20140816_09_53_00_Pro.jpgWP_20140816_09_53_00_Pro.jpgWP_20140816_09_52_53_Pro.jpgWP_20140816_09_52_53_Pro.jpgWP_20140816_09_52_47_Pro.jpgWP_20140816_09_52_47_Pro.jpgWP_20140816_09_52_38_Pro.jpgWP_20140816_09_52_38_Pro.jpgWP_20140816_09_52_33_Pro.jpgWP_20140816_09_52_33_Pro.jpgWP_20140816_09_52_26_Pro.jpgWP_20140816_09_52_26_Pro.jpgWP_20140816_09_52_20_Pro.jpgWP_20140816_09_52_20_Pro.jpgWP_20140816_09_52_13_Pro.jpgWP_20140816_09_52_13_Pro.jpgWP_20140816_09_52_06_Pro.jpgWP_20140816_09_52_06_Pro.jpgWP_20140816_09_51_59_Pro.jpgWP_20140816_09_51_59_Pro.jpgWP_20140816_09_51_51_Pro.jpgWP_20140816_09_51_51_Pro.jpgWP_20140816_09_51_42_Pro.jpgWP_20140816_09_51_42_Pro.jpgWP_20140816_09_51_26_Pro.jpgWP_20140816_09_51_26_Pro.jpgWP_20140816_09_51_09_Pro.jpgWP_20140816_09_51_09_Pro.jpg

#5 9 years ago

that comet is very nice looking. wonder how the cab got so beat up ? I have a comet too but my playfield looks like your cabinet . how bout trade my comet for your pinbot. lol my cabinet is pretty nice lol

#6 9 years ago

Lol, yeah I keep debating if I should just take the plunge and buy the stencil and put some elbow grease into it. Prolly cost me less then $150 to make the cabinet shine. Just many, many hours of labor, lol.

#7 9 years ago

ya it would be one of the nicest comets around tho, and its a lot less work than restoring a playfield. very nice comet I must say

#9 9 years ago

Anyone able to advice me on reasonable prices for each of these pins? I need to decide how much elbow grease is really worth it versus just selling them in current condition.

#10 9 years ago

Prolly 1100 for pinot and 750 for comet.

#11 9 years ago

if you put in the time to re stencil the comet it would be a nice example of the game...some minor touch up on playfield and your good to go...would net you enough extra cash on the sale to make it worth your time.

#12 9 years ago

Yeah, what about replacing the broken ramps? I figured that was a wash because they are readily avail, so why outlay the capital.

#13 9 years ago

Ok, have placed them in the Market at the suggested pricing to test the waters.

Promoted items from Pinside Marketplace and Pinside Shops!
$ 39.99
Eproms
Matt's Basement Arcade
 
$ 35.99
Eproms
Matt's Basement Arcade
 
From: $ 17.00
Lighting - Backbox
Twisted Tokens
 
$ 36.95
Eproms
Pinballrom
 
$ 18.95
Eproms
Pinballrom
 
$ 18.00
Electronics
Yorktown Arcade Supply
 
$ 175.00
Lighting - Interactive
Professor Pinball
 
$ 1.00
Pinball Machine
Pinball Alley
 
2,800
Machine - For Sale
West Chester, PA
$ 54.99
Cabinet - Shooter Rods
Lighted Pinball Mods
 
$ 69.00
Gameroom - Decorations
Pinball Pimp
 
3,152 (OBO)
Machine - For Sale
Pulaski, PA
3,450
Machine - For Sale
Ogden, UT
$ 69.00
Gameroom - Decorations
Pinball Pimp
 
$ 36.95
Eproms
Pinballrom
 
2,600
Machine - For Sale
Columbus, OH
$ 44.99
Cabinet - Shooter Rods
Pinball Shark
 
$ 69.00
Gameroom - Decorations
Pinball Pimp
 
$ 18.95
Eproms
Pinballrom
 
Great pinball charity
Pinball Edu

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/fsft-2-for-1-williams-pinbot-williams-comet and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.