The Good:
-100% playable, no switch issues & no glitches
-Plastics are 99% including unbroken upper left sling plastic and the top of the vortex
-Freshly installed plastic protectors
-XPin displays just installed
-LED's in backbox and a few LED's scattered in top right of playfield
-Light grid looks great, no overlays that I can see, and little to no mylar bubbling or insert lifting (not an expert)
-On board battery holder was removed and replaced with off board one
-Shooter rod/spring/clip brand new
-New flipper buttons
-New super bands installed
The Bad:
-Light topper was shattered and glued back together, pieces missing
-There is no glass with the translight, just the plastic sheet (I don't notice it when installed)
-Some playfield wear under mylar (this may be good as it implies mylar was not from factory, see photos)
-Planking and crazing throughout playfield, but not enough to impact game play (see photos)
-A few worn spots, small in size (see photos)
-While cabinet side or "OK", the front and parts of the backbox are pretty beat up (see photos)
WP_20140816_09_58_35_Pro.jpgWP_20140816_09_58_16_Pro.jpgWP_20140816_10_02_47_Pro.jpgWP_20140816_10_02_07_Pro.jpgWP_20140829_16_03_29_Pro.jpgWP_20140829_16_03_22_Pro.jpgWP_20140829_16_03_17_Pro.jpgWP_20140829_16_03_07_Pro.jpgWP_20140829_16_03_01_Pro.jpgWP_20140825_19_29_51_Pro.jpgWP_20140825_19_29_44_Pro.jpgWP_20140825_19_29_33_Pro.jpgWP_20140825_19_29_22_Pro.jpgWP_20140816_10_02_57_Pro.jpgWP_20140816_09_58_56_Pro.jpgWP_20140816_10_01_44_Pro.jpgWP_20140816_10_01_11_Pro.jpgWP_20140816_10_00_51_Pro.jpgWP_20140816_10_00_37_Pro.jpgWP_20140816_10_00_30_Pro.jpgWP_20140816_10_00_19_Pro.jpgWP_20140816_10_00_13_Pro.jpgWP_20140816_09_59_59_Pro.jpgWP_20140816_09_59_48_Pro.jpgWP_20140816_09_59_40_Pro.jpgWP_20140816_09_59_33_Pro.jpg