Hi

I just remove a 2004 cpr playfield from my game to put a 2014 new one. The playfield have been in my game for 4 years. It's not perfect, but real close. I found a topic that explain all the difference between the 2004 and the 2009 playfield

https://pinside.com/pinball/forum/topic/fathom-playfield-by-cpr-differences

All the blue insert got the pinball pal correction kit

http://www.pinballpal.com/inserts/index.php

And the big advantage is all the mecanism as been installed so, all the hole are there and at the right place, so the swap shoulb be lot esier. The only assembly i had to chim is the drop target (6 bank and 1-2-3 bank).

The playfield got a couple of automotive clearcoat when i got it.

There is one place where the new clear seperated with the old one... See pics

image-285.jpg

There is a dropbox links for the pics:

https://db.tt/PHPwkpz0

If you want specific pics, just ask me and i will take it.

I want 650$ US + shipping (I'm in canada, so expect to pay a little more for the shipping) I will have a CPR box for it.

If you're not in a rush, i will be at allentown all the weekend, can bring it for free, but need to pay in full to close the transaction.

image.jpg
image-972.jpg
image-948.jpg
image-199.jpg
image-937.jpg
image-495.jpg
image-234.jpg
image-927.jpg
image-256.jpg

Bump

open to offer...

Playfield sold, pending payment

No problem

Should be a lot easier, because with a new playfield, you have to check all the assembly to be sure it's fit and work correctly and pre-drill all the hole.

When i did my second Fathom swap, I change all the insert socket for 44/47. I keep the 555 only for the GI. Can i suggest you to do the same, make a big difference with new socket and ground braid!

Good luck with your swap!

playfield swap1.jpg

playfield swap2.jpg

Cool!

Happy it land safe!

Happy swap!

seem worse then it is in reallity... take your time, take a lot of pics, label everything and seperatly and you should be fine!