(Topic ID: 107325)

FS: Sorcerer boards, plastics & more. Prices Reduced!!

By Alan_L

9 years ago



Topic Stats

  • 8 posts
  • 6 Pinsiders participating
  • Latest reply 9 years ago by Zatanna
  • Topic is favorited by 1 Pinsider

You

Linked Games

#1 9 years ago

I am selling a complete boardset and displays for a Williams System 9 Sorcerer. These boards and displays will also work in Williams Comet and Space Shuttle pins,and in a Strike Zone shuffle alley.

They have been fully tested in another Sorcerer machine and have performed 100% correctly.

The MPU/Driver/Sound board has been repaired by an experienced board repair tech, it has new G.I. resistors, and resistor array and nicely repaired traces. Part number: D-10535 (5764-10749-00).
$150 without Sorcerer ROMS, $175 with ROMS. $200 includes MPU and Speech board and all Sorcerer ROMS. Pics below.

Added 11/1: MPU sold without ROMS. ROMS and speech board still available.

The Power Supply board, D-8345 (5765-09466-01) has all five new capacitors and a new G.I. header. $45.00. Pics below.

The Flipper Power Supply board, C-9939 (5768-09725-00) has a new capacitor. $13. Pics below.

The Speech board, C-10717-532 (5766-10805-00) (REV 2 roms) includes the short ribbon cable.
$40 without Sorcerer ROMS, $50 with ROMS, $25 including ROMS when purchased with MPU. Pics below.

The Display Driver board, D-8363 (5760-09461-02) looks fine, works fine. $40. Pics below

There are five displays, four 7-digit, D-8364, and one 4-digit, D-8365, all digits bright and working, includes all five long ribbon cables. $150.00 for all five displays. Pics below

Added 11/1: displays sold.

I have six plastics left from the machine, please see pics below. The three smallest are $6 each, the two larger ones are $9 each and the largest two-piece plastic with the red eyes is $15. Pics below.

The playfield components I still have are: slingshot assemblies, $20 for the pair.
2 (different) kickers, $10 each.
The three-bank drop target assembly (decals nice), $25.
3 flipper assemblies, $12 each, $30 for all three.
3 pop bumper assemblies, $10 each, $25 for all three.

Apron with Shooter Gauge, $20. Pic below.

Complete transformer panel, including both Transformers, all wiring intact, power cord, and large protective screen. $66. Note: shipping will be expensive.

Shipping is additional to : USA, Canada, Europe, New Zealand and Australia.

Thanks for looking, please don't hesitate to ask questions.

Alan Leroy
Jarrettsville, MD 21084

// Error: Image 307520 not found //// Error: Image 307521 not found //// Error: Image 307522 not found //// Error: Image 307524 not found //// Error: Image 307525 not found //// Error: Image 307523 not found //// Error: Image 307526 not found //// Error: Image 307527 not found //// Error: Image 307528 not found //// Error: Image 307529 not found //// Error: Image 307533 not found //// Error: Image 307538 not found //

Post edited by Alan_L: some parts sold

#2 9 years ago

PM sent.

#3 9 years ago

Pm Sent

#4 9 years ago

Pm sent

#5 9 years ago

Pm sent

3 months later
#6 9 years ago

Do you have the caps for the pop bumpers? That's the only part of them I really need. Mine are chipped to hell.

#7 9 years ago

No, I'm sorry, caps were sold long ago.

Alan

#8 9 years ago

I figured, but thanks for letting me know.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/fs-sorcerer-boards-plastics-more-prices-reduced-1 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.