(Topic ID: 107139)

FS Rollergames in PA *SOLD*

By LEE

9 years ago


Topic Heartbeat

Topic Stats

  • 36 posts
  • 8 Pinsiders participating
  • Latest reply 9 years ago by LEE
  • No one calls this topic a favorite

You

Linked Games

Topic Gallery

View topic image gallery

RG-11222014-JustArrived-web-c.jpg
P1040924.JPG
P1040978.JPG
P1040944.JPG
P1040942.JPG
P1040938.JPG
P1040939.JPG
P1040936.JPG
P1040931.JPG
P1040932.JPG
P1040920.JPG
P1040924.JPG
P1040921.JPG
P1040922.JPG
P1040923.JPG
P1040917.JPG

You're currently viewing posts by Pinsider lee.
Click here to go back to viewing the entire thread.

#1 9 years ago

FS Williams Rollergames in excellent condition.

I'm selling my beautiful, low play, Rollergames. I'm out of room and something has to go.

Super clean cabinet with no fade. No planking. Hard to find one this nice.

Very nice playfield. Full Mylar. Minor bubbling, minor wear. I had thoughts of pulling the mylar and clear coating it - Ooh, how nice it would be

Freshly shopped. Everything rebuilt(even though it played fine before I shopped it).

Original matching boards. HV section has been rebuilt, voltage dropped to displays. Only one GI connector on the Interconnect Board needed to be upgraded. No damaged traces/jumpers.

Cointaker LED's. I left bulbs by lower flippers(under slings/in-lanes) to help counter ball strobing - personal preference. EZ to change out if you need to do it yourself.

Korn's Magnet Ground Mod performed. I tied it thru the harness to the back box ground for a clean factory look. Magnet works very well.

The Wall ramp had a very small area that was damaged. I repaired the area with a professional clear plastic repair system and added a Cliffy protector. Diverter works well.

All manuals/paperwork there including a Flyer for Expo 1990!

Shipping thru NAVL type services is not an issue for me.

New asking price 1950

Just outside of Pittsburgh, PA

More pics;
http://s64.photobucket.com/user/marsmanpgh/library/RollerGames%203?sort=6&page=1

P1040918.JPGP1040918.JPG

P1040919.JPGP1040919.JPG

P1040917.JPGP1040917.JPG

Post edited by LEE: Price Adjust

#2 9 years ago

P1040923.JPGP1040923.JPGP1040922.JPGP1040922.JPGP1040921.JPGP1040921.JPGP1040920.JPGP1040920.JPG
Obligatory shooter lane pic;
P1040924.JPGP1040924.JPG

#3 9 years ago

P1040931.JPGP1040931.JPGP1040932.JPGP1040932.JPGP1040936.JPGP1040936.JPG

.

#4 9 years ago

P1040939.JPGP1040939.JPG

P1040938.JPGP1040938.JPG

P1040942.JPGP1040942.JPG

P1040944.JPGP1040944.JPG
.

#7 9 years ago
Quoted from davewtf:

you left out the price.

It's there. And in the Market Place

#8 9 years ago
Quoted from Whysnow:

what is "Korn's Magnet Ground Mod performed."

Man, What ever happened to Google????

Here;
http://www.thekorn.net/rollergames_ground_mod/

Helps to ensure that the magnet will work to it's top most performance.

#10 9 years ago

I edited in the price before your post showed too

#13 9 years ago
Quoted from davewtf:

thought i was going crazy. lol

Yeah, I'm already crazy, so......

#14 9 years ago
Quoted from Whysnow:

thanks. I have never had a problem with my mag but good to know in case I do.

This one had no problem(as long as it wasn't plugged into a 100 foot extension cord). But, it's my 3rd RG and I'm kinda figuring them out.

#15 9 years ago

Had this one at the York show and it played great for two days straight. Always a nice shake down for a freshly shopped game.

#16 9 years ago

DaBump

#19 9 years ago
Quoted from shlockdoc:

Was it not 2200 at York?

No actually it wasn't.

But hey, that's only my personal recollection of someone who actually owns the game.

Quoted from CrazyLevi:

This isn't York.

You are indeed correct. This is Pinside, where people from all walks of life come together to share the experience of pinball.

#20 9 years ago
Quoted from shlockdoc:

Was it not 2200 at York?

Quoted from CrazyLevi:

This isn't York.

OK,
You two talked me into it, and I'll do even better;
New Price!

#22 9 years ago

Thanks Dan. It is a very nice RG. My 3rd RG that I have had and by far the nicest one I have ever played.

I don't want to sell anything, but my basement is my gameroom, my work area, and my families basement too. I really need to clear up some room and get to the three(+) projects that I have.

#23 9 years ago

Here's a pic of the ramp entrance. Still nice.
P1040978.JPGP1040978.JPG

#24 9 years ago

Bumped

#25 9 years ago
Quoted from LEE:

Here's a pic of the ramp entrance. Still nice.

Had some inquiries on the ramp.

It had a small chip probably smaller than a pinkie fingernail out of it. I used a two part plastic repair system to fill the chip and to re-enforce some small cracks. All of the repairs are under the Cliffy ramp protector.
There are a couple of lines in the photo that may look like cracks(up the rt side and across the metal flap), but they are really just marks left by the liquid part of the plastic repair system that got away from me. They could have been sanded out and polished up, but I didn't want to take away plastic material from the ramp where it needs it most. Besides, it's hidden from view anyway.

#27 9 years ago

I do agree, most are broken.
Back way before Cliffy's were being made for a RG, I had to make a protector for my very 1st RG. It was much larger due to more damage.

#29 9 years ago

Thanks.
Always nice to get beat on my own games at a show. It seemed to happen a bit there. Lack of beer?

#31 9 years ago

Nice clean low miles game.
P1040924.JPGP1040924.JPG

#32 9 years ago

Price adjusted.

1 week later
#33 9 years ago

Bumped.

1 week later
#34 9 years ago

Rollergames has been sold.
Thanks for the interest.

1 month later
#36 9 years ago

Thanks.
I'm glad to learn that you enjoyed the one I brought to York. It certainly was/is a sweet one.
Nice to hear that you scored one for yourself too.

You're currently viewing posts by Pinsider lee.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/fs-rollergames-2?tu=lee and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.