FS Williams Rollergames in excellent condition.

I'm selling my beautiful, low play, Rollergames. I'm out of room and something has to go.

Super clean cabinet with no fade. No planking. Hard to find one this nice.

Very nice playfield. Full Mylar. Minor bubbling, minor wear. I had thoughts of pulling the mylar and clear coating it - Ooh, how nice it would be

Freshly shopped. Everything rebuilt(even though it played fine before I shopped it).

Original matching boards. HV section has been rebuilt, voltage dropped to displays. Only one GI connector on the Interconnect Board needed to be upgraded. No damaged traces/jumpers.

Cointaker LED's. I left bulbs by lower flippers(under slings/in-lanes) to help counter ball strobing - personal preference. EZ to change out if you need to do it yourself.

Korn's Magnet Ground Mod performed. I tied it thru the harness to the back box ground for a clean factory look. Magnet works very well.

The Wall ramp had a very small area that was damaged. I repaired the area with a professional clear plastic repair system and added a Cliffy protector. Diverter works well.

All manuals/paperwork there including a Flyer for Expo 1990!

Shipping thru NAVL type services is not an issue for me.

New asking price 1950

Just outside of Pittsburgh, PA

More pics;
http://s64.photobucket.com/user/marsmanpgh/library/RollerGames%203?sort=6&page=1

P1040918.JPG

P1040919.JPG

P1040917.JPG

_{Post edited by LEE: Price Adjust}

P1040923.JPGP1040922.JPGP1040921.JPGP1040920.JPG
Obligatory shooter lane pic;
P1040924.JPG

P1040931.JPGP1040932.JPGP1040936.JPG

.

P1040939.JPG

P1040938.JPG

P1040942.JPG

P1040944.JPG
.

It's there. And in the Market Place

Man, What ever happened to Google????

Here;
http://www.thekorn.net/rollergames_ground_mod/

Helps to ensure that the magnet will work to it's top most performance.

I edited in the price before your post showed too

Yeah, I'm already crazy, so......

This one had no problem(as long as it wasn't plugged into a 100 foot extension cord). But, it's my 3rd RG and I'm kinda figuring them out.

Had this one at the York show and it played great for two days straight. Always a nice shake down for a freshly shopped game.

DaBump

No actually it wasn't.

But hey, that's only my personal recollection of someone who actually owns the game.

You are indeed correct. This is Pinside, where people from all walks of life come together to share the experience of pinball.

OK,
You two talked me into it, and I'll do even better;
New Price!

Thanks Dan. It is a very nice RG. My 3rd RG that I have had and by far the nicest one I have ever played.

I don't want to sell anything, but my basement is my gameroom, my work area, and my families basement too. I really need to clear up some room and get to the three(+) projects that I have.

Here's a pic of the ramp entrance. Still nice.
P1040978.JPG

Bumped

Had some inquiries on the ramp.

It had a small chip probably smaller than a pinkie fingernail out of it. I used a two part plastic repair system to fill the chip and to re-enforce some small cracks. All of the repairs are under the Cliffy ramp protector.
There are a couple of lines in the photo that may look like cracks(up the rt side and across the metal flap), but they are really just marks left by the liquid part of the plastic repair system that got away from me. They could have been sanded out and polished up, but I didn't want to take away plastic material from the ramp where it needs it most. Besides, it's hidden from view anyway.

I do agree, most are broken.
Back way before Cliffy's were being made for a RG, I had to make a protector for my very 1st RG. It was much larger due to more damage.

Thanks.
Always nice to get beat on my own games at a show. It seemed to happen a bit there. Lack of beer?

Nice clean low miles game.
P1040924.JPG

Price adjusted.

Bumped.

Rollergames has been sold.
Thanks for the interest.

Thanks.
I'm glad to learn that you enjoyed the one I brought to York. It certainly was/is a sweet one.
Nice to hear that you scored one for yourself too.