I love messing around with making my Mods.
These are extras, some were tested in my game.

Are these for you?

First up is a nice resin cast Fossil Dino!
Measuring almost 12", I had used this as my first topper.
Its a hard rubber like cast, and I spent a couple evenings with
Paint bringing him to life.
I added an LED Strip, tapped into the GI, from a Comet Matrix Bulb, and extension. (around $10).
There is also a metal tab on the back of the casting, if you want to hang on your wall. $35.00 Including Free Shipping

A Cast Replica Amber with a dragonfly, this is a Thick piece, and a lower
Quality. $3.00 Too Thick for Playfield, IMO. Paperweight Quality.
B Cast Replica Amber with a dragonfly This is a Thin Piece, Best Quality
I could find. I also have one with 2 tapped drill holes at base. $8.00.
$3.95 ship
C These are hard to find. They are made in Japan, and you can find them on
Ebay under "kaiyodo dinosaur". They sell for a low of $10-$15, each including
shipping.
I had these 3 mounted off the back panel on piano wire, and they bounced
like they were flying....Pretty cool anywhere. All 3, $30 Shipped.
D 6 Dinos. Also from the kaiyodo dinosaur series, I had these on my return
lane, next to wire ramps, and by the raptor cage. All 6, $30 Shipped.
($55.00 for Both Sets)
E Blue. A Licensed Blue Raptor, I believe came from a set. Took forever to
find one loose. I havent looked recently, Thought I could use as a
Replacement on a Premium....Never tried. No Idea on a Pro $5.00
F 3 Plastic Baby Dinos, in Eggs with Stands. I drilled a hole in the bottom of
one, and tested as a shooter rod, which works fine. Youll need to fill the
hollow egg. The Hole, also was to allow a light to go in, and test on the
Playfield. I think someone made a Mod from these too. $6.00 all 3
G Soft Cast resin T- Rex Skull. 6". The Jaw separates. Mounts and shows
Very nicely. The Jaw comes loose, and I had a dab of Hot glue on either
side inside, to open Jaw Wide. $40, including shipping

Last is an original, Never Installed Barbasol MOD by FLASHINSTICT.
No longer Available, and TWIPY Nominated. Sweet MOD.
Here is the thread, and an Installed photo from that thread.
$239.00 including shipping

https://pinside.com/pinball/forum/topic/jp-amp-jp2-light-mod#post-5158463