Boston, MA
Game is pretty nice. Flippers done and some led's added. Hand needs special nut to work properly. It worked perfect before the nut stripped. $1400
(Topic ID: 26223)
You're currently viewing posts by Pinsider Snowdale.
Click here to go back to viewing the entire thread.
Quoted from Rascal_H:Considering it...
Would Roy Clark bring the price down at all? I know you like some older games.
:/
? let me look the game up. Who the F is Roy Clark!?
Got this from another thread.
It is actually easy to change them out, the X nut you only have to remove the bracket on 1 side behind the matrix 2-3 bolts, remove the two c-clips off the X nut and spin it off, or slide it off if its real bad. You will be able to tell right away if you can wobble the nut on the shaft that its bad, it should be able to spin but not flop/wobble as you spin it off.
The Y nut is pretty much the same but there are c-clips on the bracing rods to remove and the main stainless bracket to get the nut out the same way with 2 c-clips.
be sure to use a tiny (real tiny) bit of lithium grease on the gear/rod when you get it back together.
This will 100% fix you problems
Quoted from TheFamilyArcade:Thanks! Is there a tool to remove and replace c clips easily? Those damn things made replacing a shooter rod quite an adventure!
Back to topic. I will be in Boston a week from this Thursday. I'll try and check out the game if still available.
I use needle nose pliers.
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider Snowdale.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
