This is a project pin I picked up with the hope of being able to fix it up over the winter. I just have too many other projects. I just want to get my money out of it.
The batteries did leak, but the boards don't look that bad. I have been slowly working on the boards when I have time. The driver board has a new 40 pin socket on it.
This pin will come with a spare MPU with a remote battery holder that I picked up a while ago as a spare for my Flash.
Over all the game looks like a good project. The backglass and cabinet look good. The playfield is very dirty and has heavy wear in front of the flippers, but no where else I would expect to see it. No wear by the in or outlanes, no wear in the ball arc or shooter lane. This would be a good game for some playfield touch up.
I don't see any hacks on the pin or other signs of abuse. This pin was apparently bought from an operator when it was only a couple of years old and has been in a guys basement model train room where it was played by lightly by the family over the years. I was told it has not been played for at least 5 years. Luckily the model train room was temp and humidity controlled.
It says "Gorgar" about every 5th time I turn the power switch on. Only the GI lights come on, nothing else. The MPU is not booting. I have not had anytime to do anything else with it.
It is located in Bellefonte, PA 16823
[email protected]
backglass front.jpg
backglass back.jpg
left side.jpg
right side.jpg
lower playfield.jpg
upper playfield.jpg
shooter lane.jpg