(Topic ID: 109303)

FS Data East Warning Stickers Label


By flashinstinct

4 years ago



Topic Stats

  • 37 posts
  • 14 Pinsiders participating
  • Latest reply 4 years ago by flashinstinct
  • Topic is favorited by 5 Pinsiders

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    There have been 14 images uploaded to this topic. (View topic image gallery).

    r&b lockdown.jpg
    image.jpg
    russ3balls.jpg
    R&B Pinball Scans - 201 - 2-Way Level Notice Sticker.png
    sample2.jpg
    DE-R&B-Panel Caution.jpg
    data-east-outlines-01.jpg
    data-east-outlines-04.jpg
    data-east-outlines-02.jpg
    data-east-outlines-03.jpg
    data-east-01.jpg
    data-east-03.jpg
    data-east-02.jpg
    data-east-04.jpg

    #1 4 years ago

    Complete Data East Set.

    Full lamination on these two sheets
    data-east-outlines-01.jpg
    data-east-outlines-03.jpg
    Clear vinyl (what is black will be white, what is white will be transparent)
    data-east-outlines-04.jpg
    Vinyl with no lamination
    data-east-outlines-02.jpg

    //////MATERIALS//////
    These are not cheap knock offs. They are printed on premium vinyl with a laminate overlay. All stickers where measured and are accurate. I never got one complaint from my WPC run.

    ///// PRICING /////
    1-2 $25 per set (shipped regular mail)
    3-4 $24 per set (shipped regular mail)
    5-9 $23 per set (shipped priority with tracking)
    10+ $22 per set (shipped priority with tracking)

    Shipping is included. Gather a whole bunch of guys from your league and save money!
    Shipping to Europe / Australia is calculated by the order.

    /////TO GET ON THE LIST ///////
    PM me to put yourself on the list.
    Supply email address, mailing address and the amount of sticker sets you wish to purchase.

    /////PAYMENT/////
    I will only start collecting money once the minimum buy is reached. I will send out payment instructions then.

    Those who have bought some similar sets previously can comment on quality.

    ///OTHER STICKERS///
    https://pinside.com/pinball/forum/topic/warning-stickers-run-2
    https://pinside.com/pinball/forum/topic/fs-wire-labels-williams-bally ($12.50 per set when purchased in conjunction with warning labels)

    Cheers,
    flash

    #2 4 years ago

    Looking forward to getting a few sets of these for upcoming R&B game restores.

    #3 4 years ago

    as promised pictures are posted! Still missing the coin door menu sticker if someone as one in decent condition...

    #4 4 years ago

    bump for measurements and picture of coin door sticker.....anyone?

    #5 4 years ago

    Pm me your email addy and I'll send pics n measurement

    #6 4 years ago

    Coin door sticker found thanks Dave. Will post final sample tonight. This set will be final.

    #7 4 years ago

    Edits
    Coin Door added. White install ball stickers are not longer with rounded edges. The set is now complete.

    #8 4 years ago

    Pm sent. In for a set.

    #9 4 years ago

    PM sent. In for a set also.

    #10 4 years ago

    Man I thought they're would have been more interest in these....guess not... bump for Monday

    #11 4 years ago

    Post a link in the Data East club thread:
    https://pinside.com/pinball/forum/topic/data-east-pinball-club

    #12 4 years ago

    Let's get these done folks!! bump

    #13 4 years ago

    I did .. like 4th post. I just don't want to keep reposting on that thread. aka alienating people. I think I do that enough already on these threads

    #14 4 years ago

    I don't think this will happen folks, I need at the very least 30 names. We only have 6 sheets reserved so 24 more to go.

    #15 4 years ago

    I just saw this post. If these would be appropriate for BTTF and LAH, then I'm in for two sets.

    #16 4 years ago
    Quoted from robotron911:

    I just saw this post. If these would be appropriate for BTTF and LAH, then I'm in for two sets.

    What would make them appropriate? I was under the impression I had all the bases convered....

    #17 4 years ago

    Sign me up for 1 set. PM sent.

    #18 4 years ago
    Quoted from flashinstinct:

    What would make them appropriate? I was under the impression I had all the bases convered....

    There might be different runs DE did depending on the year. Take a look at these stickers on an R&B machine. They seem to be a different color, and the "Install 3 Balls" one is completely different:

    https://www.flickr.com/photos/37999418@N04/6925333622/in/set-72157629437568588/

    #19 4 years ago
    Quoted from FirebrandX:

    There might be different runs DE did depending on the year. Take a look at these stickers on an R&B machine. They seem to be a different color, and the "Install 3 Balls" one is completely different:
    https://www.flickr.com/photos/37999418@N04/6925333622/in/set-72157629437568588/

    Yeah and I know Guns N Roses is different too. Unless I make seperate install balls for each generation.
    Can anyone take a nice shot of their DAta East stickers if they are not listed in the pictures up top.

    #20 4 years ago

    Here's the original caution sticker in my R&B backbox (apologies for the condition and curled edge on the left). It was secured to the panel with staples, which you can see have rusted from 20 years of public use in the humid south. The background color is again that yellow-green hue as seen in RussMeyer's R&B machine stickers in that link I posted.

    DE-R&B-Panel Caution.jpg
    #21 4 years ago
    Quoted from FirebrandX:

    Here's the original caution sticker in my R&B backbox (apologies for the condition and curled edge on the left). It was secured to the panel with staples, which you can see have rusted from 20 years of public use in the humid south. The background color is again that yellow-green hue as seen in RussMeyer's R&B machine stickers in that link I posted.

    DE-R&B-Panel Caution.jpg 37 KB

    Yeah that one is done.

    #22 4 years ago

    I'm in - bump.

    #23 4 years ago

    I'm in for a set too.

    #25 4 years ago
    Quoted from flashinstinct:

    Yeah that one is done.

    In that yellow-green hue or just the orange in your OP?

    #26 4 years ago

    Yeah I've seen some in both. Just felt like the fade yellow was lacking color but if people want closer to the real thing I could always change it. Would have to bring it to a vote really. On the very last runs before data east went sega these sticker where more vibrant I guess but I could be wrong.

    #27 4 years ago

    Do you guys want them more like this?
    sample2.jpg

    #28 4 years ago

    A little lighter on the color. Like have the blue value at 100. Here's one of the ones I did last year for my machine:

    R&B Pinball Scans - 201 - 2-Way Level Notice Sticker.png
    #29 4 years ago

    Will do tonight. Are the install balls yellow ok? It would help if I had direct access to a DE machine but I don't.

    #30 4 years ago

    The install balls sticker is white and narrow on Russ's machine. Here's a blowup of it:

    russ3balls.jpg
    2 weeks later
    #31 4 years ago

    Did you get enough interest to make the DE stickers? I could really use a set to finish up my JP shop job.

    #32 4 years ago

    Still very interested also!

    #33 4 years ago
    Quoted from FirebrandX:

    The install balls sticker is white and narrow on Russ's machine. Here's a blowup of it:

    russ3balls.jpg 10 KB

    This decal looks like it was made on one of these, just fyi

    image.jpg

    It was also the era when decals were made of paper, printed on almost a neon yellow/green paper the process was literally a copy machine or laser printer.

    This substrate color cannot be matched with CMYK inks, though the quality will be 1000x better.

    1 week later
    #34 4 years ago

    I found pictures from an auction of a factory mint R&B machine. Looks like it originally used the red-inked "INSTALL 3 BALLS" sticker:

    r&b lockdown.jpg
    #35 4 years ago

    The interest pretty much died off. The problem with DE machines seems that they made a different set of sticker each update they made. Specially with the install ball stickers. I know for a fact that the GNR machines, R&B, TFTC Don't use the same install ball labels. What I think might happen is I will create the install balls as a seperate set so people can pick which one they choose.

    I need a min of 30 sets to make this happen. As of today only 4 people sent me PMs. Since I can't monitor each thread ... people that are interested should PM me directly.

    Will most likely revive this thread when there is enough demand to do another Run of WPC warning Stickers.

    7 months later
    #36 4 years ago

    If not enough interest for prints, then how about sharing the artwork on here so we can print our own labels?

    Hey there! Got a moment?

    Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside