Adventures of Rocky and Bullwinkle and Friends, The
Data East, 1993
Austin Powers
Stern, 2001
Black Rose
Bally, 1992
Champion Pub
Bally, 1998
Comet
Williams, 1985
Demolition Man
Williams, 1994
Doctor Who
Bally, 1992
F-14 Tomcat
Williams, 1987You're currently viewing posts by Pinsider zablon.
Click here to go back to viewing the entire thread.
Question regarding the Space Station ramp. Is there any way to keep the left end from breaking again? Cliffy doesn't make protectors for it, and it seems that if this is easier to break than the original material that it would only be a matter of time? Anyone make any custom protectors? Thanks 
Quoted from Freeplay40:Be sure you have the correct rubbers at the entrance and that the ramp entrance in positioned properly for maximum protection between those rubbers. Note that my ramp will not align with the original screw down holes and requires that you position the ramp correctly and tap new holes for the hold down screws. If you want a protector for the left side it is not that hard to fashion one yourself. Entrance protectors are generally made of 24 gauge stainless which is pretty easy to work with. Best way to make one it to have it attach to the entrance post then up the ramp a bit where the side is flat have it bend over the ramp. That bend can be in the middle of the protector to allow it to extend further up the ramp. I do not have a Space Station ramp here to model one, but if you would help me with some photos and measurements, I could make you one.
I looked back through my list of purchasers and did not see you so expect you got this game second hand. Originally I did make the ramp with acrylic but have since switched over to dyed PETG.
I have the original at the moment but thinking about getting one as the left entrance of my ramp is broke and the ball goes in there and gets stuck. I assume that wouldn't happen if the ramp wasnt broke.. I saw these and was considering one but I was just curious if anyone had made any protector for it
You're currently viewing posts by Pinsider zablon.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/freeplay40-ramps?tu=zablon and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Kellogg, IA