Very nice!!!
PS...if you need a good donor ramp for checkpoint, shoot me a message. I have an undamaged one sitting here.
(Topic ID: 150775)
Linked Games
Adventures of Rocky and Bullwinkle and Friends, The
Data East, 1993-
Austin Powers
Stern, 2001
-
Black Rose
Bally, 1992
-
Champion Pub
Bally, 1998
-
Comet
Williams, 1985
-
Demolition Man
Williams, 1994
-
Doctor Who
Bally, 1992
-
F-14 Tomcat
Williams, 1987
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
You're currently viewing posts by Pinsider slim64.
Click here to go back to viewing the entire thread.
Quoted from Freeplay40:Post a photo of it?
I will get a couple posted tonight for you
Wasn't sure what photos you might want specifically so I took a bunch lol.
https://goo.gl/photos/EYnC8Sreg9aPax7BA
Has two small cracks, one at the entrance and one at the exit ball drop. No missing pieces and the cracks are very minor
Quoted from Freeplay40:Nice set of photos. Good news with this ramp is that art is a non-issue. Also it appears that everything attached to the ramp is with screws and nuts....excepting the flap which would be provided. Curious how those entrance protectors are secured to the ramp.
Thanks. I will take a closer look hopefully tonight and let you know.
The exit drop reinforcement is also riveted in place.
Well if you decide to move forward with it just let me know.
I've thought about putting it in my game but the ramp currently in there is doing the job so far. For the time being it's just sitting in a box.
Quoted from Freeplay40:Curious how those entrance protectors are secured to the ramp.
Protectors are held in place with very thin foam tape.
2 months later
Quoted from Whridlsoncestood:Do you have a checkpoint donor yet?
I have offered mine if he needs it/when he is ready.
4 months later
Quoted from nvu4prod:Hi Mark, thought I would revisit the question that has been brought up before regarding the reproduction of the DE Checkpoint Ramp. I know I and many other CP owners would be excited to see this ramp reproduced. Such a major component to the game! Big question is, if there is a CP owner out their that has a clean enough ramp to use as a donor.
Thanks in advance!
I have one, when freeplay is ready, I'm ready. 
Quoted from cp1610:If you need a Checkpoint ramp for repo i'll just pull it out of my machine. It's got a few minor cracks but it is one piece. I can even send my turtles pinball ramp at the same time if you want double the fun.
A turtles repro would be awesome
Quoted from nvu4prod:Great to hear Slim64 has responded with a possible donor ramp for Checkpoint. I was hoping someone would chime in after posting a few weeks back.
Mark, we know your busy but this would be great if the CP ramp could get made at some point!!
Currently just sitting in a box.
Quoted from Buzz:Do you or have you done the Who Dunnit main ramp?
I have a very nice undamaged one that i can pull out of my game if needed.
2 months later
2 weeks later
Quoted from Insane:Or like was suggested, put a rubber grommet in the hole so the post can move slightly and not stress the plastic. Might have to oversize the hole slightly to do it.
This would be the best way. Washers aren't going to stop the post from flexing in its mount.
4 weeks later
1 month later
Hopefully the new expander covers work with the new cliffy protectors.
When I get both in hand I'll post results.
Quoted from Freeplay40:I completed the first Doctor Who Time Expander piece today. Took me a while to get it just right taking into consideration the thicker plastic as well making sure the existing decal (if transferred) or new if available would fit properly.
Couple photos of the first one below as well as a closeup shot of the bottom edges of both the new and the old to show the change in thickness. I left a little more meat around the two center mounts as well as the two forward mounts.
Only providing in clear at the moment, but will consider colors later.
Price $45
Shipping $10
I can start accepting orders now and will begin shipping on Wednesday.
As usual, payments via Paypal to [email protected]
Be sure I get your address.
Note to the guys that had requested 2 of the new pieces. No additional postage for two.
Payment sent, thanks!!
1 month later
Promoted items from Pinside Marketplace and Pinside Shops!
Plantsville, CT
You're currently viewing posts by Pinsider slim64.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
