Adventures of Rocky and Bullwinkle and Friends, The
Data East, 1993
Austin Powers
Stern, 2001
Black Rose
Bally, 1992
Champion Pub
Bally, 1998
Comet
Williams, 1985
Demolition Man
Williams, 1994
Doctor Who
Bally, 1992
F-14 Tomcat
Williams, 1987You're currently viewing posts by Pinsider Chet.
Click here to go back to viewing the entire thread.
Mark,
I know there are lots of folks out there that would like to have a replacement main jump ramp for Rollergames, yours truly included. Now that the Plastic sets are available from CPR this would be a great addtion to most games that have blown out ramp entrances..
Thanks,
Mark I am really glad to hear the good news you are on the road to recovery. I appreciate a little of what you have went thru. I had a heart attack in 2015 with 100 percent blockage to a right descending coronary artery. Fortunately they got a stint in and all has been good since.
Don't know if you have ever considered doing a Rollergames ramp but I am sure there is certainly some need out there including me. Take care
Quoted from Freeplay40:There has been quite a bit of interest in the Rollergames ramp. There is an avid collector locally that has offered to let me borrow his game if I decide I want to do it. It's bigger than my current setup can handle right now. My forming machine can handle the bigger sheets but not my heat source. Still planning on building a bigger machine, but may "bridge" to the new machine by first building the heating component. This would allow me to heat the larger pieces of plastic and form on my current setup.
So...ramps for Rollergames? ... most likely eventually!
Mark, that is encouraging to hear there is a good possibility of a repro Rollergames ramp.
It is a very large mold I am sure since the ramp is really three ramps in one!!
You're currently viewing posts by Pinsider Chet.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/freeplay40-ramps?tu=Chet and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Towson, MD