With my show schedule coming to an end soon for the year, I want to remind everyone interested in using NVRAM in their games about my show special for anyPin installs.

Any show where I'll be set up offering my arsenal of parts, mods, testers, tools, board and game repair, I'll also be offering my anyPin NVRAM Battery Eliminator Show Special.

For those bringing games to these shows for others to enjoy in the free play areas, I'm offering free install for the games you bring to the show. Bring me the board from the game, and your anyPin NVRAM, and I'll hand it back to you with a professionally installed RAM socket and no more batteries will ever be required for your game again.

I'll offer the same install for anyone bringing me their CPU at the show, but don't have it there in the free play area, for only $15.

These are the shows you can find me set up at the rest of the year, so if you're going, be sure to bring me your CPUs and take advantage of this show special...

Houston Arcade Expo
Houston TX - October 20th-21st
Houston Northwest Crown Plaza
http://www.ArcadeCenter.com

My show schedule for next year is still in process, but these are the shows I know I'll be at and will be offering my show special...

Midwest Gaming Classic
Milwaukee WI - April 13-15th
Location yet TBA
http://www.MidwestGamingClassic.com

Golden State Pinball Festival
Formerly Pin-a-GoGo
Lodi CA - May 18-20th
Lodi Grape Festival Gounds
http://www.goldenstatepinball.org

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com

More? A $2K minimum, "I gotta see fee" isn't too bad is it?

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com

Changed MGC date to reflect the 13th too.

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com

Just a reminder for my last show of the year. Houston Arcade Expo is only a bit over two weeks away!

Get those CPUs pulled to bring to me at the show!

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com

At most shows these days, WPC is what I'll work on at the show. I'll take in most anything at the show, and ship back.

Depending on what comes in, I may do System 11 and Data East games too.

If a show wants me to do more, that can be worked out. I have the ability to do most any system at a show, but over the several years doing this, I've figured out that 90%+ of the stuff that comes in at a show is WPC. It doesn't make sense for me to waste very limited space on test fixture stuff if I don't tend to use it at a show.

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com

Turn around time varies greatly for a number of different reasons. WPC, DE, Sega, Whitestar, and System 11 all get done the quickest if there's no battery leakage to deal with. Generally 2-6 weeks for these system CPU and driver boards.

Getting DE boards done for pick up at MGC would not be a problem at all.

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com