Free anyPin NVRAM Battery Eliminator Install Show Special


By Borygard

2 months ago


Stats

  • 10 posts
  • 5 Pinsiders participating
  • Latest reply 2 months ago by Borygard
  • Topic is favorited by 1 Pinsider

Find

Search this topic for posts matching certain words or written by a specific Pinsider. Or both!




Linked Games

No games have been linked to this topic.




    #1 86 days ago

    With my show schedule coming to an end soon for the year, I want to remind everyone interested in using NVRAM in their games about my show special for anyPin installs.

    Any show where I'll be set up offering my arsenal of parts, mods, testers, tools, board and game repair, I'll also be offering my anyPin NVRAM Battery Eliminator Show Special.

    For those bringing games to these shows for others to enjoy in the free play areas, I'm offering free install for the games you bring to the show. Bring me the board from the game, and your anyPin NVRAM, and I'll hand it back to you with a professionally installed RAM socket and no more batteries will ever be required for your game again.

    I'll offer the same install for anyone bringing me their CPU at the show, but don't have it there in the free play area, for only $15.

    These are the shows you can find me set up at the rest of the year, so if you're going, be sure to bring me your CPUs and take advantage of this show special...

    Houston Arcade Expo
    Houston TX - October 20th-21st
    Houston Northwest Crown Plaza
    http://www.ArcadeCenter.com

    My show schedule for next year is still in process, but these are the shows I know I'll be at and will be offering my show special...

    Midwest Gaming Classic
    Milwaukee WI - April 13-15th
    Location yet TBA
    http://www.MidwestGamingClassic.com

    Golden State Pinball Festival
    Formerly Pin-a-GoGo
    Lodi CA - May 18-20th
    Lodi Grape Festival Gounds
    http://www.goldenstatepinball.org

    --
    Rob Anthony
    Pinball Classics
    http://LockWhenLit.com
    Quality Board Work - In Home Service
    borygard at gmail dot com

    #2 86 days ago

    This is the best deal to be had anywhere. 2 years ago I pulled all the mpus from my machines at PaGG and had them done. Don't think it took Rob more than 10 minutes for any single board.

    The man is a wizard.

    P.s. he charges more if you watch

    #3 86 days ago
    Quoted from Cheddar:

    .....
    P.s. he charges more if you watch

    More? A $2K minimum, "I gotta see fee" isn't too bad is it?

    --
    Rob Anthony
    Pinball Classics
    http://LockWhenLit.com
    Quality Board Work - In Home Service
    borygard at gmail dot com

    #4 84 days ago

    Changed MGC date to reflect the 13th too.

    --
    Rob Anthony
    Pinball Classics
    http://LockWhenLit.com
    Quality Board Work - In Home Service
    borygard at gmail dot com

    1 week later
    #5 72 days ago

    Just a reminder for my last show of the year. Houston Arcade Expo is only a bit over two weeks away!

    Get those CPUs pulled to bring to me at the show!

    --
    Rob Anthony
    Pinball Classics
    http://LockWhenLit.com
    Quality Board Work - In Home Service
    borygard at gmail dot com

    #6 72 days ago

    Which boards can you repair at the show? Probably good to make a list of them on here. https://pinside.com/pinball/forum/topic/2017-houston-arcade-expo/page/2#post-3994614

    #7 72 days ago

    Bumping for an awesome product!!!! I actually sent 2 boards out to Borygard that needed socketed and he fixed me right up....adding his brilliant Anypin NVRAM. His soldering work is gorgeous on my boards....clean and professional. Recommended 100%.

    #8 72 days ago
    Quoted from PinballManiac40:

    Which boards can you repair at the show? Probably good to make a list of them on here. https://pinside.com/pinball/forum/topic/2017-houston-arcade-expo/page/2#post-3994614

    At most shows these days, WPC is what I'll work on at the show. I'll take in most anything at the show, and ship back.

    Depending on what comes in, I may do System 11 and Data East games too.

    If a show wants me to do more, that can be worked out. I have the ability to do most any system at a show, but over the several years doing this, I've figured out that 90%+ of the stuff that comes in at a show is WPC. It doesn't make sense for me to waste very limited space on test fixture stuff if I don't tend to use it at a show.

    --
    Rob Anthony
    Pinball Classics
    http://LockWhenLit.com
    Quality Board Work - In Home Service
    borygard at gmail dot com

    #9 72 days ago
    Quoted from Borygard:

    At most shows these days, WPC is what I'll work on at the show. I'll take in most anything at the show, and ship back.
    Depending on what comes in, I may do System 11 and Data East games too.
    If a show wants me to do more, that can be worked out. I have the ability to do most any system at a show, but over the several years doing this, I've figured out that 90%+ of the stuff that comes in at a show is WPC. It doesn't make sense for me to waste very limited space on test fixture stuff if I don't tend to use it at a show.
    --
    Rob Anthony
    Pinball Classics
    http://LockWhenLit.com
    Quality Board Work - In Home Service
    borygard at gmail dot com

    How long is your turn around time? I'm looking at having two DE MPU boards gone over and verified to be 100% working. I was thinking i'd send them in and pick them up at MGC

    #10 72 days ago
    Quoted from lordloss:

    How long is your turn around time? I'm looking at having two DE MPU boards gone over and verified to be 100% working. I was thinking i'd send them in and pick them up at MGC

    Turn around time varies greatly for a number of different reasons. WPC, DE, Sega, Whitestar, and System 11 all get done the quickest if there's no battery leakage to deal with. Generally 2-6 weeks for these system CPU and driver boards.

    Getting DE boards done for pick up at MGC would not be a problem at all.

    --
    Rob Anthony
    Pinball Classics
    http://LockWhenLit.com
    Quality Board Work - In Home Service
    borygard at gmail dot com

    Promoted items from the Pinside Marketplace
    $ 129.00
    Lighting - Led
    LED OCD
    $ 7.00
    Various Other Swag
    Double Danger Pinball
    $ 27.50
    From: $ 14.95
    Playfield - Toys/Add-ons
    ULEKstore
    $ 69.99
    Playfield - Toys/Add-ons
    Lighted Pinball Mods
    From: $ 210.00
    Playfield - Toys/Add-ons
    CzTV Mods
    $ 11.99
    $ 87.50
    Playfield - Toys/Add-ons
    Lermods
    $ 48.00
    Cabinet - Other
    ModFather Pinball Mods
    $ 20.99
    Lighting - Interactive
    Lee's Parts
    $ 194.99
    Lighting - Led
    PinballBulbs
    $ 109.99
    Playfield - Toys/Add-ons
    Lighted Pinball Mods
    $ 194.99
    From: $ 79.95
    Playfield - Other
    Hookedonpinball.com
    From: $ 95.00
    Lighting - Interactive
    Professor Pinball
    $ 9.95
    $ 24.50
    $ 149.99
    Playfield - Toys/Add-ons
    Lighted Pinball Mods
    $ 7.65
    Cabinet Parts
    Third Coast Pinball
    $ 150.00
    Cabinet - Toppers
    Rock Custom Pinball
    $ 58.00
    Playfield - Other
    ModFather Pinball Mods
    $ 859.00
    Pinball Machine
    Mircoplayfields
    From: $ 42.00
    Cabinet - Shooter Rods
    ModFather Pinball Mods

    Reply

    Wanna join the discussion? Sign up for a Pinside account, or log in if you already have an account.


    Hey there! Got a moment?

    Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside