Flash Gordon
Bally, 1981You're currently viewing posts by Pinsider sideways.
Click here to go back to viewing the entire thread.
Andyzola87 Any more progress on your FG machine? I'm about to install a new overlay on my flash gordon pinball machine, and I wanted to see if you had any advice, haha.
Here's my progress: https://pinside.com/pinball/forum/topic/new-overlay-project-on-flash-gordon
Quoted from Andyzola87:It’s currently in storage waiting for the Hardtop product to be produced. I had issues with the playfield overlay bubbling after I cleared the PF because I didn’t wait long enough for my clear to dry and it gassed out and caused bubbles under the overlay. If I could give you any advice I would say make sure your clear has fully cured before you lay down that overlay and after you lay it down maybe place a piece of acrylic over the whole playfield and place weights on it to hold it down. I’ve been keeping track of your restore project and it looks really good, keep up the good work and let me know if you have any other questions.
Awesome!! Thanks so much for the advice, @andyzola87. Really appreciate it! I'll definitely let you know if I have any other questions.
Quoted from eabundy:Here is mine, finished.
eabundy Nice job! It really turned out nicely.
You're currently viewing posts by Pinsider sideways.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/found-overlay-for-flash-gordon?tu=sideways and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Houston, TX