Regretfully I am selling my very first pinball machine. It has been a fun
machine, and still is.

The board were recently removed and sent in to be reworked- a new 5 volt bridge
rectifier, a couple transistors replaced and one IC chip, solder re flowed to
all pins. There were a couple of hack jobs on the GI lighting that were removed
and corrected. The game plays correctly with no errors.

Playfield has been stripped ,cleaned and waxed. All new polyurathane rings and
post sleeves installed. A complete new plastic set was installed. I made my own
plastic protectors of 1/16" PETG impact resistant acrylic with a scroll saw and
reciprocating belt sander table and Dremmel tool. I added a cover to the right
inlane trough to contain balls shooting errantly out of the Super VUK.

All LED lamps for insets and GI. I added a green halo to help illuminate the
Alien Baby. Also added one spot reflector lamp to illuminate Flukeman.I also
have green LED flipper buttons 12vdc.

I added PinballPro speaker set to the game , and added the right speaker channel
components to the sound board- now it sounds so much better than a single
speaker in the backbox. The translite is in good shape.

Legs are in great shape with new levelers.New flipper bats,crank
assemblies,bushings and coils. No problem hitting the ramps forward or
backhand-power to coils is at normal setting.

The cabinet is the only eye sore on the game. The usual ink missing at the
flipper buttons from sweaty hands, a few scratches to the side decals. There
was once a security bar over the coin door- and there are 3 screw holes from
this.

And perhaps the best thing about the game is the new Cabinet skin from Back
Alley Creations- it has been a long wait for this.