Selling my re-import WCS. I acquired it last spring and did a complete top-side tear down/shop. Details below:


First, the bad:

It's a re-import (if that matters to you)
Front is faded
Regular (non-gold) legs
Some side-art missing/crinkling near back legs
A couple of scratches in translite.
Minor wear around a couple of inserts - inserts are not raised.


Here's the good:

• Complete Top-side tear-down
• Cleaned, waxed playfield
• New Plastics
• I installed custom clear acrylic protectors for ‘Header’ and ‘Tackle’ plastics to prevent them from breaking
• Full Cliffy Protector Set
• Includes new carbon fiber protectors for ‘Assist’ and ‘Free Kick’ kick-out holes
• New Soccer Ball (Marco)
• New Soccer Ball Motor
• New Star Posts
• New post sleeves (some sleeves color matched with playfield/plastics)
• New Rubber Ring Set
• New Rollover Targets
• New Kick-out hole plastics
• New Pop Bumper Caps
• New Upper Lane Guide Plastics
• All LED Bulbs (except flashers)
• New Incandescent Flasher Bulbs
• Compete flipper rebuild, including new flipper bats
• Hardware cleaned and polished, replaced where necessary
• Flame-polished ramps (did not flame polish near stickers on ramps)
• New leg levelers
• Polished lock-down bar assembly (it needs a new High Voltage sticker)
• New flipper buttons
• No credit dot

Other Improvements:
• New IDC connector harnesses for GI connectors
• Replaced J120, J121 connector pins (wires were previously soldered directly to pins)
• Replaced top opto sensor on right flipper board.
• Repaired broken spliced wires where necessary (goal light wire, goalie target wire, etc).

Other Miscellaneous Information/Disclaimers:
• Playfield has a small gouge behind left ramp. It does not affect play, and is completely hidden by the ramp and surrounding plastics.
• Backbox latch does not completely close tight.
• Ramp flag stickers could stand to be replaced (corners peeling away).
• Glass could stand to be replaced (small scratches, etc.).
• Right plastic return ramp to right in-lane is broken near connection to right inlane. Held in place by extra hardware (see picture).

Extras:
Extra new plastics included!
2 extra Header plastics: 1 repo, 1 NOS? (found in cabinet, still has protective film on it)
Extra right lower kicker plastic: 1 repo, NOS?
Includes all old plastics
Includes old soccer ball (rough shape)
Includes repo instruction manual

100+ additional before/during photos available here, which show mostly the before plastics:

https://goo.gl/photos/nKQgHNRKo2iTGftf9


I picked this machine up from a friend that didn't want to take it with him to Florida. He previously purchased it an in auction in Canada at least 10+ years ago.

I can bring this game to Allentown - I will be there on Friday. Looking to get $2,700.