I Love my Pin-Bot, but I picked up another machine so I need to make some room, so it’s time to let someone else love it! As usual when I sell, sorry for the nauseatingly long description, no one likes surprises so I wanna keep everything transparent so I’m gonna point out EVERY ISSUE that I am aware of big or small….
First the “Bad” areas (not really bad, but worth noting), most of these are "standard" Pin-Bot wear areas... Tiny wear spot by top left out hole from the saucer kick out (Hidden in the "tunnel"), add-on decal that was placed just outside of visor out holes by a previous owner is lifting but it looks OK under it so if you removed it it would be fine, inside lower visor plastic over the "eyes" has chips on left and right side where it screws to the posts (again, typical on most Pin-Bots and you can still buy these for not too much if it's a big deal to you). Back right corner of cabinet has had a repair done on the inside by a previous owner, but it is repaired well and isn’t noticeable on the outside. A couple Mylar bubbles here and there but nothing major and no paint loss as a result of it. That's it for the bad!!
Now to the good!
Since I got this, I did my standard tear down/Novus 2/wax shop job including the outside of the cabinet, polished all metal etc. Replaced all of the following with new parts.....Bumper caps, bumper skirts and bodies, flipper bats, coil sleeves, rubbers.
Installed Comet warm white LEDs in the GI and back box. Comet non-ghosting color matched LEDs in the inserts. Rottendog MPU (with audio fix so Pin-Bot won’t be screaming at you). New X-pin displays, Translite is perfect, PF is perfect except the noted areas. Cabinet is a strong 9 except for the noted inside repair. New visor and hat decal, no broken plastics (except the one already noted). Ramps are perfect, Vortex spiral ramp is unbroken (these are always broken). Legs look new. Topper is perfect with no cracks or repairs. Visor opens and closes fine as does the left raising ramp. Mini PF is perfect with no stress cracks around the red posts (another common issue). Speaker grill cloth is not ripped or snagged.

I'll let the pics speak for the rest. Let me know if you need anything else or any more details. I’m OK with shipping if you set it up on your end, and I’ll get the game ready on my end.