Up for sale: Terminator 2 pinball machine (Williams 1991).

Machine is in good shape overall. Playfield is clean and legible with no obvious wear. All playfield lights have been upgraded to LEDs. Backglass has no obvious wear. All switches and targets are working, except as described below. Interior is clean. I have a 100-pack of new white LEDs that I will throw in as a bonus (see pix). ROM version is L8.

There are a few hardware issues:
1) One of the center targets needs to be re-soldered.
2) LEDs on the terminator skull are crooked.
3) The center drain switch isn’t working properly. When the ball drains, you have to wait for the machine to do a ball search before it will kick it back into play. I did some research and apparently there’s an infrared LED in there that may need replacing. I even have the part for it (see pix) but I just don’t know how to solder and don’t have time to learn. Should be an easy fix for someone with more experience servicing pinball machines.
4) Both inlane switchs and the right outlane switch don’t always register.

If desired, I can take off the legs and fold down the backglass for transit. Also, I’ve unhooked the plumb bob on the tilt sensor because I wanted to practice my saves (it can be reconnected if desired).

Here are some videos of the machine if you're interested:
play demo: https://www.dropbox.com/s/8uljwrhr8cmfqng/T2%20play%20demo.mp4?dl=0
attract mode: https://www.dropbox.com/s/m5mplrwr1deih3p/T2%20attract%20with%20playfield%20details.mp4?dl=0

The machine can be pickup up and paid for locally in Grants Pass, OR. Alternately, the buyer can arrange shipping at their expense / risk. If shipping, payment must be made in advance via an escrow transaction (via escrow.com or safefunds.com) if we can agree on the terms. I would also consider a wire transfer payment from an established dealer with good feedback.