This Street Fighter 2 Pinball Machine is working 100%. I cleaned up the cabinet, touched it up, and waxed it.


I fixed some of the issues that are common with Gottlieb games. I fixed the speaker hum to a lower decibel, did a ground mod, and changed the light box’s resistor for the flash lamps.


I replaced all the 67 flashers with new 67 flashers. I kept the original working flashers in case they are needed. All other bulbs have been replaced with leds.


I replaced the 3 middle stand-up targets with new smart switches from Pinball Resource.


I took apart the playfield to clean, touch-up, and replace rubbers. I also took apart the car crush assembly to clean and resolder the opto switch. Car crush is working 100% and has original car. There is a tiny crack on the car that is not noticeable unless you look close. I know there is a clear car replacement available to paint, but it’s not worth replacing at this point.


I changed the trim around the back box to yellow trim. I kept the original black trim in case someone wanted to switch it back. I painted the legs yellow and bolts red. I added red leg protectors and red rubber feet.


I installed blades, new instruction cards, Ryu toy with miniature pinball in playfield, 7 inch arcade game that adheres to the head with velcro and powers on with the game, 7 inch Ryu figurine that has velcro on the bottom and has a blue light strip underneath, and a 12 inch flasher light strip that is adhered to the top of the back box.


I added new locks for the back box and coin door. Each lock has two keys. I also added a Street Fighter 2 promotional key chain to match the machine.


The game is in my basement and I have battery powered stair lift to get it out of the basement and to the buyer’s vehicle.


Let me know if you have any questions. More pictures or videos upon request.