This pin is in 100% working order and in nice shape. The backglass is mint with no flaking or wear. The playfield is in nice shape with some wear around the 60 insert (very common on this game as that bulb is on all the time in attract mode) and a small area above the roulette wheel where someone used too long of a screw for a lamp socket. I fixed it up and made it level. The roulette wheel cover has new padding. All of the fly away targets are in nice shape and work great every time.

All new rubbers, bulbs and a premium silver ball have been installed. All boards have been went thru and reflowed header pins as needed. New fuse clips have been installed for the 20amp fuses on the rectifier board as they were burnt up and 6amp diodes were installed for CR5-CR8.

MPU has a lithium battery installed along with new ROMs. All 4 MPU connectors have new .100 crimp contacts for reliability. The reset circuit components were replaced as well. The solenoid board has a new capacitor at C23.

Both flippers have been completely rebuilt with all new parts including new flipper coils. They are nice and strong. A new playfield glass is installed and a new ball plunger and springs have been installed as well. A new Bally logo sticker has also been installed on the coin door.

An original manual with schematics is included. The apron is in good shape and has a set of original cards that I found in the manual.

Delivery available if needed. PM me if you are interested or have any questions. Thanks!