Fully working, partially restored, and fully shopped.Cabinet is solid through out, stripped, sanded, and reassembled internally, tilt bob assembly panel repainted as well as the transformer shelf. Back box needs the lock mechanism. I had no reason to ever lock it so I left it alone. Playfield has the "Hot Dog" cutouts. Classicarcades insert decals and Szabo's arcades center shuttle decal under 2PAC clear coated playfield,touched up all wear spots. The clear coat has some fisheyes in the upper region due to the previous owner using a silicone based wax which caused the issue. It is only visible at certain angles and IMO does not affect gameplay. At the top of the ramp there are gouges in one of the plastics and top ramp from a bracket that comes mounted to the inside of the cabinet, not sure why it's there if it causes damage, outside of that there are no broken or cracked plastics. The entry way to the ramp has the typical cracking due to it's thinness and age. There is no longer an original backglass due to it's poor condition, it was replaced with an Ed Cheung translite and new clear glass.

The following has been installed or replaced....

Partial Comet Led's in the playfield
Full Titan silicone rubbers
New flipper leaf switches
New balls
New flipper bats
Custom instruction cards
NASA apron patch
NOS shuttle
New blue lane guides (still have the original red ones)
Polished chrome look lock down bar and playfield metals
New pop bumper caps, skirts, bodies, metal and fiber yokes
New flipper buttons
lithium battery
polished acorn nuts
2 new displays
New power cord
New flipper coils
New target decals