Up for sale is my beautiful Sorcerer pinball. Picked up a new game, so I need to make some room. I’ve only had this a few months, but in that time I’ve done the following in that time….

The “bad” (not really anything bad, but honesty is the best policy) …

The playfield has been touched up a bit in a few areas by my amazingly artistic wife. Nothing too bad or major, it was much better than most sorcerers to begin with and was probably just fine for most people’s tastes. She color matched everything perfectly. Then I spot clear coated the touchups with automotive clear coat so everything will stay where it is. She did a great job, you really gotta look hard to tell where she touched anything up.That’s it for the bad.

The Good and everything else!!...

The backglass is absolutely amazing!! No flaking or bubbling, colors are rich and vibrant! The cabinet is solid with a few typical bumps and bruises but nothing major or structural and better than most.
I’ve completed the following….

Installed the “missing” fuse blocks for the bridge rectifiers, performed the system 9 Mosfet MPU lamp section resistor delete mod WITH voltage split (no more “oven temperatures” in the head!), replaced ALL electrolytic caps on the power supply (Power supply rebuilt) and MPU while chasing down the dreaded system 9 hum (it’s now gone!), reflowed all the header pins and ground contacts on the back of the boards, replaced the volume pot, replaced the toasty connector for the lamps on the MPU. No acid damage, and installed a new lithium battery.

It has been fully shopped…stripped down completely novus buff and carnauba waxed, rebuilt with new flipper coil sleeves, new star posts, new lane guides, new rubbers, new flipper bats, new balls, new X-Pin displays, freshly painted legs with new leg bolts and levelers.
Everything looks sounds and works perfectly. Gonna miss it, but room is room, so something has to go.

She will be missed but life goes on!

As always PLEASE as questions. I will happily share a video and take more pictures if you need it. No one likes surprises!

Shipping is OK, if you set it up i'll get it ready. First floor walkout with no stairs.

*I can only get on pinside at home, it's blocked at work, so I apologize for any delays getting back to you.*