Archived ad
Pinside keeps a record of old ads in its Market Archive, for historical purposes and as a price reference. This ad has been ended by its seller and is now archived.
Game - for sale
For sale: Scared Stiff
Added: 2020-04-13 02:08:17 UTC
• Ended: April 19th, 2020
Condition: Partially restored (almost original)
Price
$ 6,800 (OBO)
Open for offers
For sale is a partially restored Scared Stiff. The machine is not fully restored, but it is much better than just simply shopped. The cabinet has been completely stripped cleaned, repainted, and a new set of side art installed. The playfield was stripped completely, cleaned, waxed, and reassembled. Both flippers are rebuilt. All switches have been adjusted or replaced, all plastics are replaced with new ones, all bulbs have been replaced with a mixture of Cointaker and Comet LEDs. The ramps were disassembled and cleaned, I believe they are original and are in great shape with no major cracks. The machine is fully working with no problems, and is ready for your gameroom.
I am located in Southern Delaware. Local cash sale preferred but will work with your shipper however you will need to pay via paypal Friends/Family transfer. I am also open to trades, would prefer a CV, original AFM, or a CC +/- cash however I will entertain any other trades. The machine is set up inside my ground level gameroom and you are welcome to come check it out and play it. I will also bring this machine with me to Pinfest if it is still available and the show still happens this year.
Pros and Additions:
-ColorDMD
-Pinshakers Shaker Motor Kit V2.09 Standard
-Full LEDs
-New Side Art
-New Playfield Plastics
-Flipper Fidelity Speaker Kit
-New set of Pinball Life Perfect Play Rubbers
-New Legs, Leg Bolts, Levelers, Balls, Leg Plates
-New set of side rails and playfield glass channels
-New lockdown bar
-New side art
-New MPU
-Custom shooter rod
-Boards are all clean and un-hacked
-Original Lepers and Slingshot Monsters
-Hole protectors installed
Cons:
-Some kind of moisture damage to the inside of the backbox lightboard
-Small wear spot in the mylar below the "T" in terrifying, little touchup was required
-The back of the backbox was sanded and repainted over the yellow caution screenprint
-The slingshot plastics are originals but they do have some cracks near the mounting bolts
-There is some slight lifting on the left side lock and lab inserts
Best Regards,
Robert
Item photos
Photos not showing? Make sure your ad blocker plugin is not hiding them.
Contact
Note! This is an archived ad. No longer for sale!
Seller insights
These are robgo777's market stats.
Listing result
The seller marked this ad as "not sold". The item did not sell through Pinside so there's no listing result.