Up for sale is a rough, but complete, Bally Xenon. This is a project game. The playfield is worn and many of the parts were stripped off at some point before I got it. However, they are all included in a spare parts box. It would be a good candidate for a hardtop if someone was up for it.

The good
-Game powers on, coins up and starts a game
-Some of the boards have been rebuilt with new headers/caps, but all are working
-including 5 new Pinitech led displays. The HV fuse has been pulled from the rectifier board as it is not needed anymore. (They all work, the photo simply caught them at a weird part of the display cycle)
-playfield bottom is completely populated and all mechs working
-no major hacks (other than the amazing doorbell "free play" button!)
-A spare worn playfield is included
-A box of spare parts is included, including some spare mechs, metal ball guides/ramps, two complete plastic sets, spare coils, bags of hardware and a spare complete tube shot ramp
- legs are included, along with the playfield glass and lockdown bar (they aren't shown in the photos)
-backglasses are in good shape with a single flaked spot near the middle of the inner backglass

The bad
-The playfields are pretty worn and dirty
-topside of playfield is missing a few posts and all the rubbers
-bottom cabinet is in decent shape, players condition. Backbox had the bottom pulled off at some point and it was glued back together


Long story short, Its a project game with most of the parts needed in order to build the whole game out. Missing parts would be a flipper rebuild kit, rubbers and some posts.
I'm located just south of St. Louis Missouri near Six Flags.
Walk out basement, so no stairs involved.