Bally Lost world pinball machine.

Plays fast and fun.

Recapped audio and replaced both pots. Sounds are crystal clear

Solenoid Driver Board has been recapped (not by me) and had ground mod completed.

MPU has supercap installed (not by me) instead of leak-prone battery. Fresh 2716/2716/2732 erpoms burned and installed.

Overall MPU is in great shape, couple resistors roached (since been replaced), no battery damage.

Has original rectifier board installed.

New ball installed.
All new rubbers installed.

Replaced all most bulbs on PF with new incandescent while doing rubbers. May still need a few.
Bulbs in back box replaced also, one missing.

NOTES:
Backglass is flaked off on bottom left (see photo)

One cracked plastic over saucer, clear epoxied back together. (see photo)

One chipped plastic on left slingshot, clear spacer holding down that corner now. (see photo)

Playfield has wear up the center (down to the wood) and around both saucers. (see photo)

One display has one digit missing, moved to BIP location where that digit isn’t needed. Other displays work great, some burn on P3. Original Plasma.

The rectifier has some miles on it after 43 years. I have a second original rectifier board that looks to be in very nice shape visually, untested, that I can include at NC if you want to swap in and stay original.

I have a brand new aftermarket rectifier board I can include for +$60 if you want new tech and don't care about staying original.

Playfield could use a wipe and a fresh coat of wax.

Am making room for a different pin so this is up for sale.

Would also be willing to trade for other arcade items.

Offers may be accepted based on how soon you can get it out of my way.

Ground level access, I have a jack so you can get it right to your vehicle, 2 feet from where you can park.

Can come and play before you buy. On western tip of Ann Arbor, just off I-94