As I often do, I've listed this as PARTIALLY restored (almost original) as I've taken some liberties with playfield parts etc. All will be summarized below.

I'll start with the 'BAD':

Disclaimer: I've not had years of clear coating experience and as such
the clear coat has some minor imperfections, to me they look like dimpling. Pictures seem to hardly show it. I do strive for an unobtainable perfection but have yet to achieve that, I restore machines with the full intent to make them as solid and bullet proof as an item with hundreds of moving parts can be, for long trouble free use in a home environment.

ALL inserts were removed and replaced with starburst type.
ALL star posts have been replaced with bright green type.
The advance bonus square target was replaced with a more fitting round one (game is Laserball not laser box)
Insert art work was mostly done in black
Original BG has some paint wear but has been clearcoated to help prevent further wear.

the GOOD:
Entire machine was disassembled and restored including playfield touch ups, cab re-stencil and clear coat applied on each.
A new BG translite was created and printed and new glass to accompany it
All new Rottendog combination MPU installed
Full LEDs with the only colored lamps in top clear lane guides (green)
Plastics are all original and very clean, almost no yellowing nor nicotine stain. Top left lady plastic has one crack but a replacement piece is included although it does have some yellowing.
All flippers were rebuilt (yes, including bushings)
Spinners were repainted and cleared
Full Titan rubbers in black adorn the machine
All cab metal parts (legs, lock bar, etc) were soaked in Evaporust and polished
Ball Shooter fully rebuilt (rod w/ handle, springs, sleeve and tip)
New 3D printed light baffles on the light board (I did not print them)
New speaker
All caps replaced in the back box, game also updated for fireproofing per Vids guide
All coils re-wrapped & re-dioded (is that a word)
New switches for coils, slings, pop bumps and flippers
New coil sleeves in all coils
Drop banks have been upgraded with Siegecraft boards with connectors and new decals installed on the target faces
Clear cab leg protectors HD leg brackets
Nylon parts have been dyed black
Black pop bump skirts
Reese rails
brand new PF glass
and much much more (not really but sounds good right?)

Abbreviated restore thread:
https://pinside.com/pinball/forum/topic/laser-ball-just-because-resto-mod

A short YouTube video has been posted here:

Feel free to ask any questions or make comments now.

I can and would be willing to package for STI or your LTL carrier of choice.
It will be wrapped in a moving blanket, stretch wrapped and secured to a full size pallet, you would be responsible for the shipping charges but available to pick up at a standard loading dock, no residential p/u fees.