Welp, the time has come. I have a nice JP for sale. Game is 100% working and in very good condition. Has Cointaker LED kit including flashers. Typical scoop wear but playfield and cabinet are in really good shape. You can see this in the pictures. Game is located in 63129 and I have a walk-out basement and will be happy to help you load it. I prefer a local sale so you can see it first hand but I'm willing to ship if buyer arranges everything. Thanks for looking!

Game Details:
- Really nice playfield. No wear, dings or scratches except for the scoops which are a little beat up like most of these games.

- I did a full shop job on it in Spring of 2013. New rubbers, several new coils, switches and parts, new glass, lots of repair on the boards from burned connectors and flaky fuse clips which DEs are known for.

- All six new trough switches and I changed the wires from soldered on to quick disconnects so you can change them out easier if they ever act up. Sanded down the small divots in the ball trough - that's a fairly known problem on DEs as well.

- New switch at ball eject - that thing was a pain to calibrate

- Changed pop bumper spoons to Williams brand so I can actually have a chance at saving Timmy from that damned electric fence.

- TZ Powerball installed for egg

- Full Cointaker LED kit including flashers. This thing is bright!

- Has Chad's new code - "6.0 Unofficial"

- Shaker motor works great.

- Plays 100% including T-rex which was rebuilt this summer. Jaw wire has been resoldered, jaw link coil and all t-rex switches have been replaced. I also have a new up/down motor included - never been used.

- Small cabinet mark on right side and at the bottom of the front (beneath coin door) - both are in pictures.

- A few scuffs/dings on the side of back box from moving over the years.

- One broken plastic right by the VUK. Most people don't notice it until I point it out.

- One metal rail on the VUK habitrail broke at the weld and is held together by twisted wire. This is in the pics as well. It came like this and I left it since it works and I don't have access to a welder and I don't think it's a big enough deal.

- The cheap DE playfield supports came off but are in the coin box. Same thing here - I didn't repair the wood where they mount because I either use the metal support rod on the inside right of the cabinet to hold the playfield slightly up or the bungee strap at the bottom to hold it straight up depending on what I need to work on.

- Game currently has Rottendog power supply included because the 5v on the original board was acting up. I've since had the original DE power supply board repaired by Chris Hibler and it's included with the game.

- Manual is inside the game.

- No topper.