Archived ad
Pinside keeps a record of old ads in its Market Archive, for historical purposes and as a price reference. This ad has been ended by its seller and is now archived.
Game - for sale
For sale: Johnny Mnemonic (Williams, 1995)
Added: 2016-08-07 23:44:21 UTC
• Ended: August 14th, 2016
Condition: Used - shows wear but 100% working and clean
Price
$ 3,000
Looking to sell my Johnny to free up a spot in my collection to allow for another machine to eventually take its place. I've got a few pictures posted here, but have a full photo set available on photobucket here:
http://s1326.photobucket.com/user/McSirTuna/library/Pinball%20-%20JM
Additional video of the machine can be found from my latest pinball stream under past broadcasts:
https://www.twitch.tv/buffalopinball/profile
I will start with the negatives:
-Cabinet is not fully red. There is some orange fade come towards the front, but as a whole it's most likely above average for JM cabinet fade.
-Cabinet has a some dings / scratches which can be seen in the photos. The right side head has some damage on the back bottom corner which can be seen in the photos.
-The playfield is very good overall, but there is one defect spot that can be seen near the throwing spike awards. (see photo).
-Previously had issues with magnetic balls getting stuck in the trough and hand. Changed out the balls and added a Pinbits trough plastic insert. Streamed for 5.5 hours without issues since the change.
-Top left pop bumper light is out - might be a broken connection if i recall, never got around to fixing.
-Left ramp top plastic has a little wear on the image (see picture)
-Top edge damage under lockdown bar (see picture) can't see when lockdown bar is installed.
Now for the positives / extras / mods / etc.:
-Legs were replaced awhile back with new black legs (still nice)
-ColorDMD is installed
-Creative Acrylics Topper w/ light
-Mirror Blades
-LEDs throughout the machine (backbox, inserts, GI)
-GI OCD board installed
-LED OCD board (not installed)
-Remote battery pack installed to keep boards safe
-Mezel Mods Throwing Spikes flasher cover
-Pinnovator headphone jack with sub connection (not installed)
-Johnny Keychain
-Johnny shotmap poster
-Diverter plastic near matrix output is installed (w/ spare too)
-Jones plastic is installed - (3D model Jones is NOT included)
-Spare hand motor included
-Various extra bits in coin box can be seen in pictures
Contact
Note! This is an archived ad. No longer for sale!
Seller insights
These are McSirTuna's market stats.
Listing result
The seller ended this ad and submitted the final sales price into our price database but opted not to disclose the price publicly.
Seller contributed to Pinside for this listing!