So I completely stripped this machine down, painted it, and put it all back together. New clear coated CPR playfield and plastics. The exterior cabinet has a decal overlay. I stripped and painted the coin door, replaced the police light motor, installed nvram, all new headers and trifurcon connectors on all board connectors (as pictured)new caps, relays, rebuilt the power supply boards.Every zip tie replaced and harness' cleaned I also installed new resistors on the main board along with FET transistors to reduce power consumption. Installed fuses on the Bridge rectifiers and added a special solenoid fuse board. Machine functions flawlessly. This machine has upgraded parallel flipper coils. New snubber boards and GI light sockets. Full set of Cliffys, including enhanced ball guides. Comet leds throughout.(still have two flashers on the back box). Trough light. Reinforced leg brackets installed. All new target switches on the playfield. Pop bumpers all new. Titan rubbers throughout. There is a small imperfection (scrape?) on the backglass where the lock is located about the size of a dime, otherwise its perfect. I also had made a custom ramp(clear) decal made. I awaiting a (very cool) traffic light which should be here this week, but wanted to post this asap. It will be included in the sale or trade. I also installed two 4x6 speakers in the top and an 8 in sub in the main cabinet. (ready for pinsound) I generally like machines from the 90's era and later. will add cash if need be if you have something I like. Will work with you to ship it if need be.